Influence of DIC hydrothermal process conditions on the gelatinization properties of standard maize starch

نویسندگان

  • Ikbal Zarguili
  • Zoulikha Maache-Rezzoug
  • Catherine Loisel
  • Jean-Louis Doublier
  • I. Zarguili
  • Z. Maache-Rezzoug
  • C. Loisel
  • J.-L Doublier
چکیده

Standard maize starch was hydrothermally treated at residual moisture content (~12 %) by Instantaneous Controlled Pressure Drop for various pressure levels and processing times. In order to examine the homogeneity of the starch treatment, three thicknesses (1.5, 1 and 0.5 cm) were tested at 3 bar of steam pressure. For the three thicknesses, the temperature and the moisture content of starch were measured during the treatment at the bottom and the surface. The results showed an absence of gradient of temperature and moisture content only for a thickness of 0.5 cm. Gelatinization transition temperatures (To, Tp) increased after hydrothermal modifications. The change in the gelatinization temperature range was observed after DIC treatment when pressure level or processing time increased. For a high pressure (≥ 4 bar) associated with low processing time (2 minutes) a total gelatinization of starch was observed. It also occurs when the processing time is important (~15 min) and pressure lower than 4 bar.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Structural modifications and thermal transitions of standard maize starch after DIC hydrothermal treatment

Standard maize starch was hydrothermally treated by Instantaneous Controlled Pressure Drop (DIC) process at three pressure levels (1, 2 and 3 bar) corresponding to the temperatures of 100, 122 and 135 °C (at 13–27% moisture), respectively. The structural effects of various hydrothermal conditions were examined with differential scanning calorimetry (DSC) and wide-angle X-ray diffraction. In ord...

متن کامل

Effect of hydrothermal treatment on the physical and rheological properties of maize starches

Standard maize (SMS) and waxy maize starch (WMS) were hydrothermally treated at their residual moisture level (~12 %) by Instantaneous Controlled Pressure Drop process in order to obtain pre-gelatinised starches in a single step. The effect of two parameters of this process, namely the steam pressure level and processing time, on the structural and rheological properties of the native maize sta...

متن کامل

Effects of heat-moisture treatment on physicochemical properties of wheat starch

Abstract Heat-moisture treatment is a physical method for starch modification to improve its functional properties depending on the application. The functional characteristics of the heat-moisture treated starch depend upon the source of starch and treatment conditions including time and temperature. The main objective of this study was to determine the functional properties of heat-moisture tr...

متن کامل

Determination of the gelatinization temperature of starch presented in maize flours

A study of the influence of the moisture and the grain size on the gelatinization temperature (Tp1) of starch from four industrial maize flours as well as an unprocessed maize sample is presented. The gelatinization is a phase transition that can be observed using Differential Scanning Calorimetry (DSC), and it is manifest as an endothermic peak in the DSC thermogram. Results show that for 60, ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017