Homeotropically Aligning Phase Separated Columnar Structures For Fabrication Of Flexible Electrooptical Devices
نویسندگان
چکیده
منابع مشابه
Homogeneous and Homeotropic Alignment of Bent-Core Uniaxial and Biaxial Nematic Liquid Crystals
The effect of well-established homeotropically and homogeneously aligning polyimides, developed for calamitic liquid crystals, on the alignment of the nematic phases of bent-core mesogens was investigated using polarizing optical microscopy and conoscopy. Two polyimides, the homogeneously aligning SE7792 and the homeotropically aligning S659, were used to align three bent-core mesogens. Two of ...
متن کاملThin-film Encapsulation of Organic Light-Emitting Diodes Using Single and Multilayer Structures of MgF2, YF3 and ZnS
In this research, the lifetime of green organic light emitting diodes (OLEDs) is studied using four passivation layers. To encapsulate the OLEDs, MgF2, YF3, composed of alternating MgF2/ZnS and YF3/ZnS layers were grown by thermal vacuum deposition. Measurements show that the device lifetime is significantly improved by using YF3 and ZnS as passivation layers. However, diodes encapsulated by Mg...
متن کاملHigh performance of a solid-state flexible asymmetric supercapacitor based on graphene films.
Solid-state flexible energy storage devices hold the key to realizing portable and flexible electronic devices. Achieving fully flexible energy storage devices requires that all of the essential components (i.e., electrodes, separator, and electrolyte) with specific electrochemical and interfacial properties are integrated into a single solid-state and mechanically flexible unit. In this study,...
متن کاملArrays of indefinitely long uniform nanowires and nanotubes.
Nanowires are arguably the most studied nanomaterial model to make functional devices and arrays. Although there is remarkable maturity in the chemical synthesis of complex nanowire structures, their integration and interfacing to macro systems with high yields and repeatability still require elaborate aligning, positioning and interfacing and post-synthesis techniques. Top-down fabrication met...
متن کاملMODELLING OF THE PERMEABILITY FOR COLUMNAR DENDRITE STRUCTURES DURING SOLIDIFICATION OF MUSHY ALLOYS
A numerical model has been developed for the determination of liquid flow permeability through columnar dendrite during growth. The model is inclusive two stages, first numerical evolution of the dendrite shape during growth, and second numerical determination of the interdendritic liquid permeability. Simulation results shown which solute concentration by evolution of dendrite shape could resu...
متن کامل