Optimisation of Fuel Injection Pump Parameters of Tata 1613 & Tata 609 Engine Using Diesel &

نویسنده

  • Mohammad Javed
چکیده

Often called 'the heart of the engine', the fuel injection system is without any doubt one of the most important systems. It meters the fuel delivery according to engine requirements, it generates the high injection pressure required for fuel atomization, for air-fuel mixing and for combustion and it contributes to the fuel distribution in the combustion system-hence it significantly affects engine performance emissions and noise. In this Investigation optimization of control parameters used for optimum control of fuel delivered by the FIP of the Automotive engine is Analyzed. The parameters observed were fuel delivery, input current to driving motor, rpm of the pump, control rack travel and number of strokes. The fuelinjection system is the most vital component in the working of CI engine. The engine performance (power output, efficiency) is greatly dependent on the effectiveness of the fuel injection system and its parameters. The experiment is conducted on two MICO Bosch FIP of TATA Engine (TATA 1613 and TATA 609 FIP) as per DoE using three input parameters at different ranges and conditions. The mathematical models are developed for Fuel delivery of FIP using taguchi,anova regression. This paper also explains the optimization of FIP parameters using biodiesel. Key words-Fuel delivery, InjectionPump (FIP), DoE, Taguchi,Anova.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Reduction of emissions and fuel consumption of diesel engine by using common rail fuel injection and aftertreatment systems

In this experimental study, the fuel system of the OM364 diesel engine manufactured by IDEM company, which operates in the basic mode with inline fuel pump and mechanical governor control, is upgraded to a common rail system with electronic control by the ECU. Also, emmssion of exhaust gases is reduced by SCR and DOC catalysts then performance and emmission parameters of engine are compared i...

متن کامل

Research and Assessment of Applying Dimethyl Ether “DME” Extracted from Natural Gas “Ng”, on Diesel Engine as a Clean Fuel (TECHNICAL NOTE)

Due to the shortage of liquid hydrocarbon fuels for compression ignition engines, researchers have constantly been looking for alternative fuels. Recently, dim ethyl ether (DME) with its interesting properties, such as high cetane number and low exhaust emission has drawn a lot of interst as a suitable fuel for diesel engines. The main objective of this study was to assess the potentials and fe...

متن کامل

Numerical study of the effect of fuel injection timing on the ignition delay, performance parameters and exhaust emission of gas/dual fuel diesel engine using Computational Fluid Dynamics

Today, due to the various usage of compression ignition engines in urban transportation, as well as the need to reduce exhaust emissions and control fuel consumption, the use of alternative fuels has become common in diesel engines. Gaseous fuel is one of the most common alternative fuels that can be used in diesel engines. The utilization of alternative fuels in compression ignition engines re...

متن کامل

Emission Reduction Strategies for Small Single Cylinder Diesel Engine Using Valve Timing and Swirl Ratio

Small diesel engines are widely used for commercial vehicle and passenger car applications due to their higher torque requirements, fuel economy, and better thermal efficiency. These engines are exposed to different operating and environmental conditions and hence emissions from these engines are erratic. Strategies are required to enhance performance and reduce engine-out emissions considering...

متن کامل

Improving the combustion and emission characteristics of ISM 370 diesel engine by hydrogen addition and redesigning injection strategy

Hydrogen fuel is the cleanest fuel available. This fuel can be used as an additive in the diesel engine. Diesel engines have the advantages of strong power, high thermal efficiency and low fuel costs. There have been extensive studies on the use of hydrogen fuel in diesel engines in recent years. However, the simultaneous effect of using gaseous hydrogen fuel and changing injection strategy nee...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013