The dos and don’ts of distillation column control
نویسنده
چکیده
The paper discusses distillation column control within the general framework of plantwide control. In addition, it aims at providing simple recommendations to assist the engineer in designing control systems for distillation columns. The standard LV-configuration for level control combined with a fast temperature loop is recommended for most columns.
منابع مشابه
Model Predictive Inferential Control of a Distillation Column
Typical production objectives in distillation process require the delivery of products whose compositions meet certain specifications. The distillation control system, therefore, must hold product compositions as near the set points as possible in faces of upset. In this project, inferential model predictive control, that utilizes an artificial neural network estimator and model predictive cont...
متن کاملSimulation and Control of an Aromatic Distillation Column
In general, the objective of distillation control is to maintain the desired products quality. In this paper, the performances of different one point control strategies for an aromatic distillation column have been compared through dynamic simulation. These methods are: a) Composition control using measured composition directly. This method sufferes from large sampling delay of measuring de...
متن کاملRejection of the Feed-Flow Disturbances in a Multi-Component Distillation Column Using a Multiple Neural Network Model-Predictive Controller
This article deals with the issues associated with developing a new design methodology for the nonlinear model-predictive control (MPC) of a chemical plant. A combination of multiple neural networks is selected and used to model a nonlinear multi-input multi-output (MIMO) process with time delays. An optimization procedure for a neural MPC algorithm based on this model is then developed. T...
متن کاملEconomic Optimization of the Reflux Ratio of Two Components Stage Distillation Columns
Distillation columns are complex processes for modeling and controlling. These columns are significant parts of most chemical industries for separation of components. Control of this process is essential for achieving certain purity for products with a minimum cost. However, nonlinearities, multivariable interaction, non-stationary behavior and severity of disturbances inside the column made th...
متن کامل