Microscopic mechanism of shear bands in amorphous solids.
نویسندگان
چکیده
The fundamental instability responsible for the shear localization which results in shear bands in amorphous solids remains unknown despite an enormous amount of research, both experimental and theoretical. As this is the main mechanism for the failure of metallic glasses, understanding the instability is invaluable in finding how to stabilize such materials against the tendency to shear localize. In this Letter we explain the mechanism for shear localization under shear, which is the appearance of highly correlated lines of Eshelby-like quadrupolar singularities which organize the nonaffine plastic flow of the amorphous solid into a shear band. We prove analytically that such highly correlated solutions in which N quadrupoles are aligned with equal orientations are minimum energy states when the strain is high enough. The line lies at 45 degrees to the compressive stress.
منابع مشابه
Shear bands as manifestation of a criticality in yielding amorphous solids.
Amorphous solids increase their stress as a function of an applied strain until a mechanical yield point whereupon the stress cannot increase anymore, afterward exhibiting a steady state with a constant mean stress. In stress-controlled experiments, the system simply breaks when pushed beyond this mean stress. The ubiquity of this phenomenon over a huge variety of amorphous solids calls for a g...
متن کاملNucleation of amorphous shear bands at nanotwins in boron suboxide
The roles of grain boundaries and twin boundaries in mechanical properties are well understood for metals and alloys. However, for covalent solids, their roles in deformation response to applied stress are not established. Here we characterize the nanotwins in boron suboxide (B6O) with twin boundaries along the {0111} planes using both scanning transmission electron microscopy and quantum mecha...
متن کاملScaling description of the yielding transition in soft amorphous solids at zero temperature.
Yield stress materials flow if a sufficiently large shear stress is applied. Although such materials are ubiquitous and relevant for industry, there is no accepted microscopic description of how they yield, even in the simplest situations in which temperature is negligible and in which flow inhomogeneities such as shear bands or fractures are absent. Here we propose a scaling description of the...
متن کاملMicrostructural shear localization in plastic deformation of amorphous solids.
The shear-transformation-zone (STZ) theory of plastic deformation predicts that sufficiently soft, noncrystalline solids are linearly unstable against forming periodic arrays of microstructural shear bands. A limited nonlinear analysis indicates that this instability may be the mechanism responsible for strain softening in both constant-stress and constant-strain-rate experiments. The analysis ...
متن کاملRate-dependent shear bands in a shear-transformation-zone model of amorphous solids.
We use shear transformation zone (STZ) theory to develop a deformation map for amorphous solids as a function of the imposed shear rate and initial material preparation. The STZ formulation incorporates recent simulation results [T. K. Haxton and A. J. Liu, Phys. Rev. Lett. 99, 195701 (2007)] showing that the steady state effective temperature is rate dependent. The resulting model predicts a w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical review letters
دوره 109 25 شماره
صفحات -
تاریخ انتشار 2012