Optical transmittance degradation in tapered fibers.
نویسندگان
چکیده
We investigated the cause of optical transmittance degradation in tapered fibers. Degradation commences immediately after fabrication and it eventually reduces the transmittance to almost zero. It is a major problem that limits applications of tapered fibers. We systematically investigated the effect of the dust-particle density and the humidity on the degradation dynamics. The results clearly show that the degradation is mostly due to dust particles and that it is not related to the humidity. In a dust free environment it is possible to preserve the transmittance with a degradation of less than the noise (±0.02) over 1 week.
منابع مشابه
Wet Etching Tapered Optical Fibers to Sub-micron Diameters for Sensing Application
In this thesis we explore a novel technique to fabricate sub-micron diameter tapered fibers for sensor applications. Physically the light propagating in a tapered fiber has an evanescent field that extends into the medium surrounding the fiber containing an analyte. A sub-micron diameter taper can expels most the electromagnetic energy into the medium thus increasing the sensitivity of the meas...
متن کاملTransmittance and near-field characterization of sub-wavelength tapered optical fibers.
We have produced high transmission sub-wavelength tapered optical fibers for the purpose of whispering gallery mode coupling in fused silica microcavities at 780 nm. A detailed analysis of the fiber transmittance evolution during tapering is demonstrated to reflect precisely the mode coupling and cutoff in the fiber. This allows to control the final size, the number of guided modes and their ef...
متن کاملSensing properties of asymmetric double-layer-covered tapered fibers.
A novel, to our knowledge, device based on a tapered optical fiber with a double-layer deposition including a metallic media is presented, and its properties are studied. The main novelty of the device consists of the introduction of a dielectric layer, whereas the systems depicted in the literature are simply metal-coated tapered fibers. The presence of the dielectric layer permits one to tune...
متن کاملOptically active mechanical modes of tapered optical fibers
Tapered optical fibers with a nanofiber waist are widely used tools for efficient coupling of light to photonic devices or quantum emitters via the nanofiber’s evanescent field. In order to ensure well-controlled coupling, the phase and polarization of the nanofiber guided light field have to be stable. Here, we show that in typical tapered optical fibers these quantities exhibit high-frequency...
متن کاملCharacterization of a 3D optrode array for infrared neural stimulation
This paper characterizes the Utah Slant Optrode Array (USOA) as a means to deliver infrared light deep into tissue. An undoped crystalline silicon (100) substrate was used to fabricate 10 × 10 arrays of optrodes with rows of varying lengths from 0.5 mm to 1.5 mm on a 400-μm pitch. Light delivery from optical fibers and loss mechanisms through these Si optrodes were characterized, with the prima...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 19 9 شماره
صفحات -
تاریخ انتشار 2011