Quantifying and reducing the effect of calibration error on variability of PET/CT standardized uptake value measurements.

UNLABELLED The purpose of this study was to measure the errors introduced by regular calibration of PET/CT scanners and to minimize the effect of calibration error on standardized uptake value measurements. METHODS Global calibration factors from 2 PET/CT scanners were recorded for 3.5 and 1.8 y, comparing manufacturer-recommended protocols with modified protocols to evaluate error contributions due to operator-influenced procedures. Dose calibrator measurements were evaluated using National Institute of Standards and Technology-traceable sources. RESULTS Dose calibrator variability was less than 1%, although there was a consistent bias. Global scaling variability was reduced from 6% to 4% for scanner 1 and from 11% to 4% for scanner 2 when quality assurance and quality control procedures were applied to the calibration protocol. When calibrations were done using a (68)Ge/(68)Ga phantom, the variability for both scanners was reduced to approximately 3%. CONCLUSION Applying quality assurance and quality control procedures to scanner calibration reduces variability, but there is a still a residual longitudinal scanner variability of 3%-4%. The procedures proposed here reduce the impact of operator error on scanner calibration and thereby minimize longitudinal variability in standardized uptake value measurements.