Thin film silicon solar cells for space applications: Study of proton irradiation and thermal annealing effects on the characteristics of solar cells and individual layers
نویسندگان
چکیده
The paper reports on the effects of a proton irradiation campaign on a series of thin-film silicon solar cells (singleand double-junction). The effect of subsequent thermal annealing on solar cells degraded by proton irradiation is investigated. A low-temperature annealing behaviour can be observed (at temperatures around 100 to 160 C) for microcrystalline silicon solar cells. To further explore this effect, a second proton irradiation campaign has been carried out, but this time on microcrystalline silicon layers. The effect of proton irradiation and subsequent thermal annealing on the optical and electronic properties of microcrystalline silicon is, thus, thoroughly investigated.
منابع مشابه
Thin-film Silicon Solar Cells for Space Applications: Radiation Hardness and Applications for an Integrated Solant (solar Cell - Antenna) Module
A new device called “Solant” (for SOLar cell – ANTenna) is presented in this paper. It is a combination of thin-film amorphous silicon solar cells and flat printed antennas. A proton irradiation campaign has also been carried out on a series of n-i-p amorphous and p-i-n micromorph [microcrystalline (μc-Si:H) and amorphous (a-Si:H)] silicon tandem solar cells. The effect of thermal annealing on ...
متن کاملOptimization of Annealing Process for Totally Printable High-current Superstrate CuInS2 Thin-Film Solar Cells
Planar superstrate CuInS2 (CIS) solar cell devices are fabricated using totally solution-processed deposition methods. A titanium dioxide blocking layer and an In2S3 buffer layer are deposited by the spray pyrolysis method. A CIS2 absorber layer is deposited by the spin coating method using CIS ink prepared by a 1-butylamine solvent-based solution at room temperature. To obtain optimum annealin...
متن کاملEffect of Annealing on Physical Properties of Cu2ZnSnS4 (CZTS) Thin Films for Solar Cell Applications
Cu2ZnSnS4 (CZTS) thin films were prepared by directly sputteringCu (In,Ga)Se2 quaternary target consisting of (Cu: 25%, Zn: 12.5%, Sn; 12.5%and S: 50%). The composition and structure of CZTS layers have beeninvestigated after annealing at 200 0C, 350 0C and 500 0C under vacuum. Theresults show that recrystallization of the CZTS thin film occurs and increasingthe grain size with a preferred orie...
متن کاملDesign of Silicon Nano-Bars Anti-Reflection Coating to Enhance Thin Film Solar Cells Efficiency
In this paper a novel anti-reflection (AR) coating based on silicon nano-bars is designed and its impact on the performance of crystalline silicon (c-Si) thin-film solar cells is extensively studied. Silicon nano-bars with optimized size and period are embedded on top of the active layer, under a 100nm Si3N4 layer. As a result of the proposed layer stack, an inhomogeneous intermediate layer wit...
متن کاملProbing the Nature of Annealing Silicon Carbide Samples for Solar Cell
SiC powder preparation using Sol-Gel method. The size of nano-particles grows as the temperature exceeds 900° C. Size of probable agglomerations produced, is approximately less than 50nm. The surface is suitable to be used for dye solar cells. SiC emission occurs at wavelength area of 11.3μm or wave number area of 884.95 cm-1. In this paper probing the nature of annealed SiC samples in mixture,...
متن کامل