A proportional-integral-differential control of flow over a circular cylinder.

In the present study, we apply proportional (P), proportional-integral (PI) and proportional-differential (PD) feedback controls to flow over a circular cylinder at Re=60 and 100 for suppression of vortex shedding in the wake. The transverse velocity at a centreline location in the wake is measured and used for the feedback control. The actuation (blowing/suction) is provided to the flow at the upper and lower slots on the cylinder surface near the separation point based on the P, PI or PD control. The sensing location is varied from 1d to 4d from the centre of the cylinder. Given each sensing location, the optimal proportional gain in the sense of minimizing the sensing velocity fluctuations is obtained for the P control. The addition of I and D controls to the P control certainly increases the control performance and broadens the effective sensing location. The P, PI and PD controls successfully reduce the velocity fluctuations at sensing locations and attenuate vortex shedding in the wake, resulting in reductions in the mean drag and lift fluctuations. Finally, P controls with phase shift are constructed from successful PI controls. These phase-shifted P controls also reduce the strength of vortex shedding, but their results are not as good as those from the corresponding PI controls.