Studies on activated carbon capacitor materials loaded with different amounts of ruthenium oxide
نویسندگان
چکیده
Ruthenium oxide±carbon composites with different loadings of RuO2 on carbon have been synthesized by an electroless deposition process. Increase in RuO2 loading results in increasing the speci®c capacitance of the composite electrode. The effect of temperature treatment on the performance of these materials has been studied in detail. Maximum capacitance was observed after heat treatment at 1008C for all the composites. Increasing the oxidation temperature further converts the Ru oxides to crystalline form, which leads to poor capacitance values. A maximum capacitance of 260 F/g was obtained for 20 wt.% RuO2 loaded carbon treated at 1008C. The volumetric surface area of the composite remains constant with increased RuO2 loading. Since Ru oxides have a large pseudocapacitance, this increases the volumetric capacitance of the carbon signi®cantly. # 2001 Elsevier Science B.V. All rights reserved.
منابع مشابه
Comparison of Modified Palladium Nanoparticles and Homemade Activated Carbon Derived from Medlar for Solid Phase Extraction of Metal Ions Prior to Their Flame Atomic Absorption Spectrometry Determination
This study focus on the preparation of two supports including activated carbon derived from medlar and Palladium nanoparticles loaded on activated carbon (Pd-NP-AC). Subsequently, both adsorbent modified with a novel Schiff base chelating agent and their potential applicability for determination of trace amounts of metal ions from aqueous solution has been investigated. The method is based on c...
متن کاملInvestigation of the effect of Argon flow on the morphology of B4C nanoparticles synthesized by the VLS method
In this paper, new various morphologies of boron carbide were successfully synthesized using carbon black, activated carbon and boron oxide precursors as well as using cobalt nanoparticles as catalysts. Almost the whole morphology of synthesized boron carbide are consisted of smooth nanowires and nanobelts. With decreasing the carbon black particles size from 29 nm to 13 nm (29, 23, 17 and 13),...
متن کاملAdsorption of Hazardous Methylene Green Dye from Aqueous Solution onto Tin Sulfide Nanoparticles Loaded Activated Carbon: Isotherm and Kinetics Study
In this research, a novel adsorbent, tin sulfide nanoparticles coated on activated carbon [SnS-NP-C] was synthesized by a simple, low cost and efficient procedure for the removal of methylene green from aqueous solutions. Subsequently, this novel material characterization and identification has been completed by different techniques such as TEM, FT-IR, and UV-Vis ...
متن کاملThe Synthesized Reduced Graphene Oxide Enhanced the Capacitive Behavior of Activated Carbon/PVA as Potential Electrode Materials
In this work, activated carbon (AC) derived from biomass wastes was implemented as electrode materials in supercapacitor application. This study has adopted rubber seed shell (RSS) wastes to derive AC via pyrolysis process. Meanwhile, reduced graphene oxide (rGO) was used as an additive material in order to study the effect of the rGO in capacitive behavior. The synthesized rGO was successfully...
متن کاملMicrostructure analysis of complex CuO/ZnO@carbon adsorbers: what are the limits of powder diffraction methods?
Activate carbon impregnated with a mixture of copper oxide and zinc oxide performs well as active adsorber for NO2 removal in automotive cabin air filters. The oxide-loaded activated carbon exhibits superior long-term stability in comparison to pure activated carbon as has been shown in previous studies. The carbon material was loaded only with 2.5 wt% of each metal oxide. Characterization of t...
متن کامل