Corrosion, Friction and Wear Performance of Diamond – like Carbon (dlc) Coatings
ثبت نشده
چکیده
M. Madej, D. Ozimina, Kielce University of Technology, Poland R.Gałuszka, The Jan Kochanowski University in Kielce, Poland G. Gałuszka School of Economics, Law and Medical Sciences in Kielce, Poland The a C:H:W, TiN/a C:H:W and the CrN/a C:H:W coatings were deposited on steel surface by physical vapour deposition methods and studied for corrosion and tribological properties, after elemental and structural analysis. In friction pairs the elements coated with diamond-like carbon showed better tribological properties than the elements without coatings. The presence of interlayers in coatings contributed to an improvement in the tribological properties but decreased corrosion resistance.
منابع مشابه
Wear-corrosion performance of Si-DLC coatings on Ti-6Al-4V substrate.
Si-incorporated diamond-like carbon (Si-DLC) coatings ranging from 0 to 2 at % Si were deposited on Ti-alloy substrate by means of radio frequency plasma-assisted chemical vapor deposition (r.f. PACVD) technique, using a mixture of benzene (C(6)H(6)) and silane (SiH(4)) as the reaction gas. The synergy in wear and corrosion of Si-DLC coatings was investigated by tribological and electrochemical...
متن کاملDiamond-like carbon coatings with zirconium-containing interlayers for orthopedic implants.
Six types of diamond-like carbon (DLC) coatings with zirconium (Zr)-containing interlayers on titanium alloy (Ti-6Al-4V) were investigated for improving the biotribological performance of orthopedic implants. The coatings consist of three layers: above the substrate a layer stack of 32 alternating Zr and ZrN sublayers (Zr:ZrN), followed by a layer comprised of Zr and DLC (Zr:DLC), and finally a...
متن کاملBiomedical applications of diamond-like carbon (DLC) coatings: A review
To resist wear, biomedical components require coatings that are exceptionally hard, have low friction, and are bioinert. Diamond-like carbon has been shown to provide this capability and to prevent leaching of metallic ions into the body. There are many ways to deposit such coatings from carbonaceous precursors, and some offer the means to incorporate other elements such as nitrogen, titanium, ...
متن کاملTribological behaviour of different diamond-like carbon materials
This paper comparatively studies the tribological behaviour of different types of diamond-like carbon (DLC) coatings in a reciprocating sliding wear test. The results are interpreted in terms of structure and surface morphological characteristics. At the beginning of each reciprocating sliding wear test, the higher coefficient of friction of the DLC coatings reflects the original surface condit...
متن کاملEvaluation of tribological properties of (Ti,Al)CN/DLC composite coatings deposited by cathodic arc method.
In this study, Ti, Al and N doped DLC – referred to here after as “(Ti,Al)CN/DLC composite”- coating and pure diamond-like coating (DLC) were produced by cathodic arc deposition technique and the effects of the coating thickness on their tribological properties were evaluated. The coatings were characterized, using scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffrac...
متن کامل