BathyBoat: An Autonomous Surface Vessel for Stand-alone Survey and Underwater Vehicle Network Supervision
نویسندگان
چکیده
l Exploration of remote environments, once the domain of intrepid adventurers, can now be conducted in relative safety using unmanned vehicles. This article describes the joint University of Michigan (UMich) and Michigan Tech Research Institute’s project to design and to build a new autonomous surface vessel (ASV) for use in research, education, and resource management as well as in the commercial sector. Originally designed to assist with bathymetric surveys in the wilderness of northern Alaska, the BathyBoat has become a test-bed platform for new research in collaborative heterogeneous underwater robotic search and survey missions in ports, harbors, lakes, and rivers. The UMich Marine Hydrodynamics Laboratories are actively researching autonomous technologies such as cooperative navigation, surface vessel control, and multivehicle search and survey using the BathyBoat and the UMich Perceptual Robotics Laboratory’s Iver2 autonomous underwater vehicles. This article presents an overview of these research topics and highlights relevant real-world testing and recent missions involving the BathyBoat ASV on Alaska’s North Slope, the harbors of Illinois, and various riverine environments in Michigan.
منابع مشابه
BathyBoat: Autonomous Surface Command & Control for Underwater Vehicle Networks
This paper reports the preparation of two modified Ocean-Server AUV systems and the construction of a new autonomous surface vessel (ASV) for cooperative simultaneous localization and mapping (SLAM) research at the University of Michigan (UMich). The Marine Hydrodynamics Laboratories (MHL) has designed and fabricated the new ASV BathyBoat to serve as a targeted remote sensing platform and a mob...
متن کاملAutonomous Underwater Vehicle Hull Geometry Optimization Using a Multi-objective Algorithm Approach
Abstarct In this paper, a new approach to optimize an Autonomous Underwater Vehicle (AUV) hull geometry is presented. Using this methode, the nose and tail of an underwater vehicle are designed, such that their length constraints due to the arrangement of different components in the AUV body are properly addressed. In the current study, an optimal design for the body profile of a torpedo-shaped...
متن کاملDesign and Experimental Evaluation of integrated orientation estimation algorithm Autonomous Underwater Vehicle Based on Indirect Complementary Filter
This paper aims is to design an integrated navigation system constituted by low-cost inertial sensors to estimate the orientation of an Autonomous Underwater Vehicle (AUV) during all phases of under water and surface missions. The proposed approach relied on global positioning system, inertial measurement unit (accelerometer & rate gyro), magnetometer and complementary filter technique. Complem...
متن کاملIdentification of an Autonomous Underwater Vehicle Dynamic Using Extended Kalman Filter with ARMA Noise Model
In the procedure of designing an underwater vehicle or robot, its maneuverability and controllability must be simulated and tested, before the product is finalized for manufacturing. Since the hydrodynamic forces and moments highly affect the dynamic and maneuverability of the system, they must be estimated with a reasonable accuracy. In this study, hydrodynamic coefficients of an autonomous un...
متن کاملOPTIMIZED FUZZY CONTROL DESIGN OF AN AUTONOMOUS UNDERWATER VEHICLE
In this study, the roll, yaw and depth fuzzy control of an Au- tonomous Underwater Vehicle (AUV) are addressed. Yaw and roll angles are regulated only using their errors and rates, but due to the complexity of depth dynamic channel, additional pitch rate quantity is used to improve the depth loop performance. The discussed AUV has four aps at the rear of the vehicle as actuators. Two rule bases...
متن کامل