A Comparison of Low-Velocity Impact and Quasi-Static Indentation
نویسندگان
چکیده
منابع مشابه
Analytical Prediction of Indentation and Low-Velocity Impact Responses of Fully Backed Composite Sandwich Plates
In this paper, static indentation and low velocity impact responses of a fully backed composite sandwich plate subjected to a rigid flat-ended cylindrical indenter/impactor are analytically investigated. The analysis is nonlinear due to nonlinear strain-displacement relation. In contrast to the existed analytical models for the indentation of composite sandwich plates, the stacking sequence of ...
متن کاملNonlinear Finite Element Eccentric Low-Velocity Impact Analysis of Rectangular Laminated Composite Plates Subjected to In-phase/Anti-phase Biaxial Preloads
All impact analyses performed so far for the composite plates, have treated central impacts. Furthermore, investigations on influences of the in-plane biaxial compression, tension, or tension-compression preloads on various responses of the low-velocity impact, especially the indentation, have not been performed so far. In the present research, a finite element formulation is presented for resp...
متن کاملCorrelation of Dent Depth to Maximum Contact Force and Damage of Composite Laminates
A major concern affecting the efficient use of carbon fibre reinforced composite laminates in the aerospace industry is the low velocity impact damage which may be introduced accidentally during manufacture, operation or maintenance of the composite structures. It is widely reported that the contact behavior of composite laminates under low-velocity impact can be obtained under quasi-static loa...
متن کاملLow Velocity Impact on Relatively Thick Rectangular Plate under In-plane Loads Resting on Pasternak Elastic Foundation
This study deals with the elastic-plastic impact on moderately thick rectangular plate subjected to uniform in-plane compressive loads resting on the Pasternak elastic foundation. The proposed rectangular plates have two opposite edges simply-supported, while all possible combinations of free, simply-supported and clamped boundary conditions are applied to the other two edges. The dimensionless...
متن کاملIndentation of aluminium foam at low velocity
The indentation behaviour of aluminium foams at low velocity (10m/s ∼ 30m/s) was investigated both in experiments and numerical simulation in this paper. A flat-ended indenter was used and the force-displacement history was recorded. The Split Hopkinson Pressure bar was used to obtain the indentation velocity and forces in the dynamic experiments. Because of the low strength of the aluminium fo...
متن کامل