Thermal expansion of Ti-Al-N and Cr-Al-N coatings
نویسندگان
چکیده
a Institute of Materials Science and Technology, TU Wien, A-1060 Vienna, Austria b Christian Doppler Laboratory for Application Oriented Coating Development, TU Wien, A-1060 Vienna, Austria c Department of Physical Metallurgy and Materials Testing, Montanuniversität Leoben, A-8700 Leoben, Austria d Helmholtz-Zentrum Berlin für Materialien und Energien, 12489 Berlin, Germany e Department of Materials Physics, Montanuniversität Leoben, A-8700 Leoben, Austria f Oerlikon Balzers, Oerlikon Surface Solutions AG, LI-9496 Balzers, Liechtenstein g Plansee Composite Materials GmbH, D-86983 Lechbruck am See, Germany
منابع مشابه
Mechanical properties and thermal stability of reactive arc evaporated Ti-Cr-Al-N coatings
This licentiate thesis reports experimental and theoretical work on the high temperature mechanical properties and the thermal stability of cubic (c)-(Ti-Cr-Al)1-N1 coatings. It is demonstrated that it is possible to tailor and improve the properties of hard nitride coatings by different degrees of multicomponent alloying. When Cr is added to Ti-Al-N the coatings exhibit age hardening up to 100...
متن کاملMulticomponent Alloying for Improved Hard Coatings
Coatings are vital to protect and to increase the productivity of cutting tools in high speed and dry cutting applications. During the cutting operation the temperature may exceed 1000 oC it is therefore necessary that the coatings withstand high temperatures. A lot of development and research has been carried out during the last 30 years on finding new coating material systems providing enhanc...
متن کاملDevelopment of Al-Ti-N Composite Coatings on Commercially Pure Ti Surface by Tungsten Inert Gas Process
The present work aims to modify surface properties of pure Ti by development of Ti-Al-N intermetallic composite coatings. In this regard, tungsten inert gas (TIG) cladding process was carried out using Al 1100 as filler rod with Ar and Ar+N2 as shielding gases. Phase and structure of the samples were investigated by X-ray diffraction (XRD) technique, optical microscopy (OM) and scanning electro...
متن کاملCharacterization of TiN, CrN and (Ti, Cr) N Coatings Deposited by Cathodic ARC Evaporation
In this investigation PVD Ti-Cr)N coatings were deposited on hardened and tempered tool steel substrates using reactive arc evaporation. Physical and mechanical properties of coatings such as roughness, thickness, phase composition, hardness and modulus young and coefficient friction were evaluated. Phase compositions were studies by X-ray diffraction method. The surface microstructure and morp...
متن کاملTi-Cr-N Coatings Deposited by Physical Vapor Deposition on AISI D6 Tool Steels
In this study, physical vapor deposition (PVD) Ti-Cr-N coatings were deposited at two different temperatures 100 and 400ºC on hardened and tempered tool steel substrates. The influence of the applied deposition temperature on the physical and mechanical properties of coatings such as roughness, thickness, phase composition, hardness and Young’s modulus were evaluated. Phase compositions were st...
متن کاملStructural characteristics and tribological properties of TiAlCr(Si)CN nanocomposite films coated on the SPK 1.2080 tool steel using PVD technique
In the present work, structural characteristics and tribological properties of the Ti-Al-Cr-(Si)-C-N nanocomposite films coated on the SPK 1.2080 tool steel byPVD technique have been investigated. The PVD coating process was carried out using Ti (Si) Al and CrAl cathodes at 150 A current, 40 V bias and (Ar)0.1(CH4)0.45(N2)0.45 gas mixture for 50 min. Evaluations were conducted by OM, FESEM, AFM...
متن کامل