Quadratic behavior of fiber Bragg grating temperature coefficients.
نویسندگان
چکیده
We describe the characterization of the temperature and strain responses of fiber Bragg grating sensors by use of an interferometric interrogation technique to provide an absolute measurement of the grating wavelength. The fiber Bragg grating temperature response was found to be nonlinear over the temperature range -70 degrees C to 80 degrees C. The nonlinearity was observed to be a quadratic function of temperature, arising from the linear dependence on temperature of the thermo-optic coefficient of silica glass over this range, and is in good agreement with a theoretical model.
منابع مشابه
Unique Solution of Short Pulse Propagation in Nonlinear Fiber Bragg Grating
In this study, a new numerical method is introduced to obtain the exact shape of output pulse in the chalcogenide fiber Bragg grating (FBG). A Gaussian pulse shape with 173 ps width is used as an input pulse for lunching to a 6.6 mm nonlinear FBG. Because of bistable and hysteresis nature of nonlinear FBG the time sequence of each portion of pulse is affected the shape of output pulse. So we di...
متن کاملOptimization of Bistability in Nonlinear Chalcogenide Fiber Bragg Grating for All Optical Switch and Memory Applications
We solve the coupled mode equations governing the chalcogenide nonlinear fiber Bragg gratings (FBGs) numerically, and obtain the bistability characteristics. The characteristics of the chalcogenide nonlinear FBGs such as: switching threshold intensity, bistability interval and on-off switching ratio are studied. The effects of FBG length and its third order nonlinear refractive index on FBG cha...
متن کاملThe Transformer Winding Temperature Monitoring System Based on Fiber Bragg Grating
High temperature is one of the important reasons causing the fire in power system. Therefore, the early warning could be told by monitoring the temperature and effective measures could be taken. The corresponding accidents will be reduced. The traditional transformer winding temperature monitoring methods are electrical signal measurement and infrared measurement. Such electrical signal sensors...
متن کاملSimultaneous measurement of strain and temperature by use of a single-fiber Bragg grating and an erbium-doped fiber amplifier.
We propose and demonstrate a novel sensor by using a single-fiber Bragg grating that can simultaneously measure strain and temperature with the aid of an erbium-doped fiber amplifier. By using a linear variation in the amplified spontaneous emission power of the erbium-doped fiber amplifier with temperature, we determine the temperature. By subtracting the temperature effect from the fiber Brag...
متن کاملMulti-parameter Sensing System Using Sampled Fiber Bragg Grating
We propose a Gaussian sampled fiber Bragg grating for multi-parameter sensing system. The sampled fiber Bragg grating combines the characteristics of fiber Bragg grating and long period grating. The transfer matrix method has been used to obtain the transmission spectrum of the grating. The shifts in narrowband loss peak and broadband loss peak in the transmission spectrum have been utilized to...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied optics
دوره 43 13 شماره
صفحات -
تاریخ انتشار 2004