Polymers containing phosphorus groups and polyethers: from synthesis to application

نویسندگان

  • Smaranda Iliescu
  • Leire Zubizarreta
  • Nicoleta Plesu
  • Lavinia Macarie
  • Adriana Popa
  • Gheorghe Ilia
چکیده

UNLABELLED BACKGROUND Phosphorus-containing high performance polymers have aroused wide interest, mainly due to good mechanical properties and their excellent fire resistance. The flexibility of synthetic polyphosphoesters allows the development of polymers in order to obtain solid polymer electrolytes for rechargeable lithium batteries based on solid films with superior fire resistance. RESULTS Novel linear Phosphonate-PEG polymers were synthesized by solution polycondensation of 4-chlorophenyldichlorophosphonate as a linking agent and poly(ethylene glycol)s with different molecular weights in the presence of triethylamine or 1-methylimidazole as acid scavenger. The yields were between 54% and 88% and inherent viscosity between 0.18-0.48 dl/g. Molar masses, Mn were about 26300 g/mol for polyphosphonates with PEG 2000 and 4600 g/mol for polyphosphonates with PEG 200. The LOI values for these polymers and membranes are in the range of 26-29. The membranes based on polyphosphonate with PEG 200 and 2000 showed conductivity between 6 × 10-8 S.cm-1 and 6 × 10-7 S.cm-1 at room temperature and total ionic transference number between 0.87- 0.96. The evolution of conductivity vs. temperature is linear. CONCLUSIONS 1-methylimidazole was found to be better HCl scavenger than triethylamine, and allowed higher yields and more eco-friendly synthesis of the Phosphonate-PEG polymers for SPE. These polymers and membranes based on these polymers showed good LOI values and indicate an improvement of the safety of lithium batteries. The membranes present conductivities around 6 × 10-7 S.cm-1at room temperature and total ionic transference number is higher for membranes based on polymers with high EG unit content. Best results yield 88%, inherent viscosities 0.48 dl/g and Mn 26000 were obtained with 1-methylimidazole and PEG 2000. These membranes based on these polymers showed good LOI values (in the range 26-29%) and indicate an improvement of the safety of lithium batteries.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Organotin Polyethers as Biomaterials

Organotin polyethers are easily synthesized employing interfacial polymerization systems involving the reaction of hydroxyl-containing Lewis bases and organotin halides. A wide variety of organotin-containing polymeric products have been synthesized including those derived from natural and synthetic polymers such as lignin, xylan, cellulose, dextran, and poly(vinyl alcohol). Others have been sy...

متن کامل

Synthesis and Characterization of Polyamide Containing Maleimide Pendant Group

A series of new polyamides containing maleimide pendant group were prepared by low temperature polycondensation of 5-(4-(2,5-dioxo-2H-pyrrol-1(5H)-yl)benzamido)isophthaloyl chloride as a new monomer with various aromatic diamines in NMP. Monomer and polymers structures were identified through FT-IR, 1H-NMR and elemental analysis. Obtained polymers were soluble in polar solvents and non solu...

متن کامل

Synthesis of (Aminoalkyloxymethyl)dimethylphosphine Oxides

The tertiary phosphine oxides (TPO) comprise a large group of organophosphorus compounds to which a considerable attention in the literature is paid [1-5]. However, only few TPO ’s containing one or more primary amino groups in their mole­ cules are known. Studies on such compounds are limited [6-12]. Because of the high activity of amino groups these compounds can be used as phosphorylation ag...

متن کامل

Preparation and Properties of Thermally Stable Polyureas Containing Ether and Ketone Units

The main objective of this search was to prepare novel soluble polyureas with improved thermal stability. Accordingly, a new types of polyureas was prepared through the polycondensation reaction of a prepared diamine containing ether, keto, and naphthyl groups with 4,4’-diphenylmethan diisocyanate (MDI), toluene-2,4-diisocyanate (TDI), and isophorone diisocyanate (IPDI) in N-methyl-2-pyrrol...

متن کامل

Structural Consideration in Designing Organotin Polyethers to Arrest the Growth of Breast Cancer Cells In Vitro

The ability to inhibit cancer is inherent in organotin materials yet the structural relationships that regulate/direct this activity remains unknown. We measured antitumor activity using a matched pair of cell lines MDA-MB-231 cells that are estrogen-independent, estrogen receptor negative and MCF-7 cells, a cell line that is estrogen receptor (ER) positive. Those polyethers that contained a O-...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 6  شماره 

صفحات  -

تاریخ انتشار 2012