Advanced Characterization Method
نویسندگان
چکیده
The ferroelectricity of the Poly(vinylidene fluoride-trifluoroethylene-chlorofloroethylene) terpolymer films fabricated by the Langmuir–Blodgett (LB) technology were investigated from 180 to 300 K. The temperature dependence of the remanent polarization and the dielectric response shows a broad peak at ~ 270 K, suggesting a ferroelectric phase transition. Contrary to the perovskite relaxor, a deviation from the Merz’s law is observed in the relation between the coercive field and frequency for the relaxor terpolymer. The particular ferroelectricity of the relaxor terpolymer is considered to be associated with the distinct structure and the dynamics of its typical molecular conformations. ISAF-P1A-15 ___________________________________________________________________________________________________________________ Effect of grain size on the microwave dielectric properties of βBZN ceramics Gao-qun Zhang 1 , Hong Wang 1 , Di Zhou 1 , Jing Guo 1 1 Electronic Materials Research Laboratory, Key Laboratory of Ministry of Education, Xi’an Jiaotong University, Xi’an 710049, China Email: [email protected] In this study, β-BZN ceramics were prepared by the traditional solid state method. The samples sintered at 930 o C for 2 h possessed a relative permittivity of 74 and a Q×f value of 3740 GHz. The grain size of β-BZN ceramics was regulated by changing sintering temperature and heat preservation time. When the sintering temperature was increased from 780 o C to 990 o C, the grain grew from 0.7 um to 1.9 um as approximate exponential function. Grain growth mechanism of β-BZN ceramic with sintering temperature was discussed. The function 3 1000 3 ln 1000 3 T p l t e about the relationship between the grain size of β-BZN and sintering temperature was obtained by simulation, whose results were in accord with experimental values. For the samples at different heat preservation time, there was deviation between experimental values and results from theory model formula
منابع مشابه
Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method
Air plasma spray (APS) process is used to produce high density and flowability spherical powders. Phase transformation that occurred in this process isn’t well known. In this paper, the YSZ powders have been sprayed in water to investigate the morphology changes and phase transformations via air plasma spray (APS) method. Phase analysis of powders was examined by XRD and the crystallite size an...
متن کاملCharacterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique
Titanium and titanium alloys are often used in orthopedic surgery and dentistry because of their especial characteristics such as biocompatibility, mechanical properties, and corrosion resistance. However, their bio- inertness is the most serious drawback for biomedical applications. Therefore, a bioactive coating like hydroxyapatite (HA) is coated on their surface. In this regard, in the prese...
متن کاملGraphene Oxide Antibacterial Sheets: Synthesis and Characterization (RESEARCH NOTE)
Graphene oxide (GO) was synthesized by oxidation of graphite powder using a time-saving modification of Hummers’ method and its antibacterial activity was investigated. Different techniques were applied to characterize the synthesized GO. X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) were used to investigate the crystallinity, morphology, topograp...
متن کاملCharacterization and synthesis of hardystonite (HT) as a novel nanobioceramic powder
Objective(s): Hardystonite (HT) has been successfully prepared by a modified sol-gel method. We hypothesized thatnano-sized (HT) would mimic more efficiently the nanocrystal structure and function of natural bone apatite, owing to the higher surface area, compare to conventional micron-size (HT).Materials and Methods: The hardystonite nanopowder was prepared via a modified sol-gel method.Optimi...
متن کاملFabrication and Characterization of the Fiber Optical Taper for a Surface Plasmon Resonance Sensor
For a fiber optical surface plasmon resonance (SPR) sensor a short part of its cladding should be removed to coat a thin layer of a metal. Usually this is problematic when an optical fiber with small core diameter is used. In this paper, a new method using µliter droplet of the HF acid for short fiber optical taper fabrication is reported. Using this method in a multi-mode optical fiber w...
متن کاملElastic characterization of porous bone by ultrasonic method through Lamb waves
The object of this research is to characterize the porous bones by an ultrasonic method using Lamb waves. In recent years, the characterization of such materials has attracted many authors and takes a perfect place in the field of medicine. It requires the development of more efficient technology for getting the necessary quality and security. This paper aims to exploits the dispersion curves o...
متن کامل