Effect of Increase in Starting Pressure on Efficiency and Velocity of Caliber 0.30 Weapons

نویسنده

  • H. P. Hitchcock
چکیده

' The effect of increasing the initial pressure is studied theoretically. No improvement in muzzle velocity of a caliber 0.30 gun is found. Under some circumstances, the efficiency may be improved, but only at the expense of muzzle velocity. 1. AUTHORITY; This study was authorized by letter 0.0. 471/1464. 2» OBJECT; The object of the present report is to determine the theoretical effect on muzzle velocity and efficiency of small arms, of increasing the starting pressure by crimping the cartridge case into the cannelure. A specific example will be given for the caliber 0.30 Gun M1903, firing the Bullet, Ball M2. 3. GENERAL DIFFERENTIAL EQUATION; The interior ballistics will be determined by means of Edmund Röggla's differential equation; *n* s B^(n)'n Y n n (1) n """"""" * "Neue Diagramme für die Angewandte Innere Ballistik, Theorie und Beispiele", Edmund Rbggla, Pilsen (1930).

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

تحلیل عددی بالستیک داخلی سلاح برای پیشرانه های تفنگی با لایه تاخیری

In the current research work, a zero-dimensional code for the internal ballistic weapon analysis has been developed with a deterrent layer propellant. Today, the driving of the deterrent layer is widely used in small and medium-caliber weapons. The deterrent layer is in the form of a thin coating on the surface of a single base or double  base gun propellants. The main purpose of this type of s...

متن کامل

محاسبه چگالی، گرمای تشکیل، سرعت و فشار انفجاری مشتقات نیتروآدامانتان

 The energetic materials have different military and civilian usages and development of new materials with higher efficiency is of interest. Because of hazards related to the synthesis of the energetic materials and to reduce laboratory related expenses, nowadays, using computational methods to evaluate the properties of the energetic compounds such as heat of formation, density, pressure ...

متن کامل

Nanofluid forced convection through a microtube with constant heat flux and slip boundary

    Given the need to increase the efficiency of heat transfer in thermal systems, especially systems using nanofluids in microscale and nanoscale heat transfer equipment ideas to improve their performance is very good.In present study, the flow and heat transfer of Water-Cu nanofluid in micro-tube with slip regime with constant wall heat flux numerically simulated with low Reynolds numbers. Sl...

متن کامل

Parametric study on axial compressor performance in design condition

In This paper, a parametric study of compressor performances was performed by streamline curvature method (SLC). Effects of three input parameters in design process, e.g., number of blades, distribution of blade thickness, and blade sweep angels, on the main objective parameters in aerodynamic design, e.g., velocity distribution, efficiency and pressure ratio, has been investigated in the param...

متن کامل

A CFD Simulation of the Parameters Affecting the Performance of Downhole De-oiling Hydrocyclone

Among the all parameters affecting the performance of a downhole de-oiling hydrocyclone, the investigation of internal flow field deserves more attempts especially in the petroleum industry. In this study, the effects of inlet flow rate, inlet oil volume fraction, and oil droplet diameter on the separation efficiency and pressure drop ratio have been investigated along the hydrocyclone body. Al...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016