Analysis of the JND of Stiffness in Three Modes of Comparison
نویسندگان
چکیده
Understanding and explaining perception of touch is a nontrivial task. Even seemingly trivial differences in exploration may potentially have a significant impact on perception and levels of discrimination. In this study, we explore different aspects of contact related to stiffness perception and their effects on the just noticeable difference (JND) of stiffness are surveyed. An experiment has been performed on nondeformable, compliant objects in a virtual environment with three different types of contact: Discontinuous pressure, continuous pressure and continuous lateral motion. The result shows a significantly better discrimination performance in the case of continuous pressure (a special case of nonlinearity), which can be explained by the concept of haptic memory. Moreover, it is found that the perception is worse for the changes that occur along the lateral axis than the normal axis.
منابع مشابه
Vibration of Timoshenko Beam-Soil Foundation Interaction by Using the Spectral Element Method
This article presents an analysis of free vibration of elastically supported Timoshenko beams by using the spectral element method. The governing partial differential equation is elaborated to formulate the spectral stiffness matrix. Effectively, the non classical end boundary conditions of the beam are the primordial task to calibrate the phenomenon of the Timoshenko beam-soil foundation inter...
متن کاملPowertrain mounting system optimization to improve vibration behavior for EF7 engine
Improvement and optimization of the Powertrain mounting system are one of the ways to improve the performance NVH cars. The study aims to find the optimal stiffness coefficients for each mount in three directions. The natural frequencies of the system remain steady and stay away from the excitation frequencies, so that the system does not a resonance. It was also, using the decoupling vibration...
متن کاملAn Energy Based Adaptive Pushover Analysis for Nonlinear Static Procedures
Nonlinear static procedure (NSP) is a common technique to predict seismic demands on various building structures by subjecting a monotonically increasing horizontal loading (pushover) to the structure. Therefore, the pushover analysis is an important part of each NSP. Accordingly, the current paper aims at investigating the efficiencyof various algorithms of lateral load patterns applied to the...
متن کاملThree Different Methods for Approximate Analysis of Bar Structures
In this paper, modified solutions were compared through utilizing three different approximate methods for bar structures. The modifications considered various changes in the initial design. To authors' best of knowledge, the studies have carried out on this matter so far are not broad enough and have considerred the simeltaneous variations of size, geometry and topology on the bar structures. I...
متن کاملIdentification of Dynamic Damping Properties of a Flexible Structural Adhesive
In this paper dynamic damping properties of a nominated flexible structural adhesive have been identified using an extended-direct modal based joint identification method. It has been revealed that damping characteristics of adhesive are correlated to both frequency and mode shape. Young’s and shear moduli increase with frequency but damping on the other hand, decrease. The results showed that ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011