The Laser Rotating of Non-contact Body Scanning System
نویسندگان
چکیده
This paper focus on the requiring of Made To Measure apparel production mode according to individual types and make calibration about body measurement and production in a line. In this paper, based on the measurement principle of structured light, a laser rotating body scanning of non-contact measurement system is introduced. Firstly, the key part of this system, such as digital motor, CCD, lens, etc, is introduced and discussed. Secondly, the principle of the whole system is brought up by analyzing the theory and realization of the structured light measurement, and a 3D reconstruction mathematical model is built based on the characteristic parameter of digital motor. Lastly, some important factors related to the accuracy of this system are discussed. The point cloud data of 3D body contour is acquired successfully via data processing and data piecing together. The further processing can be done according to the raw data. The validity of the principle of this system and the feasibility of arithmetic are verified by experiments.
منابع مشابه
Designing an Intelligent, Non-Contact System for Controlling Neonate’s Body Temperature in Incubators
Background and Objective: Regulating body temperature of premature infants and preparing them a desirable physical condition for completing physical and mental development is essential. Using a system that guarantees neonate’s health in incubator at first birth hours is cardinal. Materials and Methods: In this method, a set of non-contact infrared sensors and microcontrollers regulate neo...
متن کاملThermal Analysis of Laser Hardening for Different Moving Patterns
Transient thermal field in laser surface hardening treatment of medium carbon steel was analyzed by employing both three-dimensional analytical model and finite element model. In finite element model the laser beam was considered as a moving plane heat flux to establish the temperature rise distribution in the work-piece, while in analytical model laser beam was considered as an internal heat s...
متن کاملVibration Analysis of Rotating Shaft with Loose Disk
In this paper energy method is used to calculate rotor response with loose rotating disk on it. System equation of motion is obtained based on energy method and Lagrange equation. Mathematical modeling of loose disk in a rotor bearing system has resulted in terms similar to unbalance and gyroscopic effect in the system equation of motion. The effect of loose disk axial position and orthotropic ...
متن کاملTraction and Efficiency Performance of Ball Type CVTs
This paper concerns the design and analysis, of a ball type continuously variable transmission, (B-CVT). This B-CVT has a simple kinematic structure, and same as a toroidal CVT, transmits power by friction on the contact points between input and output discs, that are connected to each other by balls. After, a brief introduction of our B-CVT structure, the performa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015