Experimental investigation of oscillatory phenomena produced by a hot wire located near and below a free surface
نویسندگان
چکیده
2014 A constant temperature hot wire is located near and below a free surface. In certain conditions, oscillatory deformations of the free surface are observed. The onset temperatures and frequencies have been determined versus the distance between the wire and the surface for four different silicon oils. J. Physique 46 (1985) 1501-1506 SEPTEMBRE 1985,
منابع مشابه
Experimental investigation for wake of the circular cylinder by attaching different number of tripping wires
An experimental study is conducted on flow past a circular cylinder fitted with some tripping wires on its surface. The work investigates the dependency of the critical wire locations on the wire size and Reynolds numbers, and examines the wake and vortex shedding characteristics in an effort to advance the understanding of the critical wire effects beyond the existing literature. The primary a...
متن کاملNumerical Investigation of Vertical and Horizontal Baffle Effects on Liquid Sloshing in a Rectangular Tank Using an Improved Incompressible Smoothed Particle Hydrodynamics Method
Liquid sloshing is a common phenomenon in the transporting of liquid tanks. Liquid waves lead to fluctuating forces on the tank wall. If these fluctuations are not predicted or controlled, they can lead to large forces and momentum. Baffles can control liquid sloshing fluctuations. One numerical method, widely used to model the liquid sloshing phenomena is Smoothed Particle Hydrodynamics (SPH)....
متن کاملExperimental Investigation of Asymmetry of Vortex Flow Over Single Delta Wings
It is generally believed that, on slender delta wings, there is a critical state at which strong asymmetric vortices are found along the leading edge on the lee-side of the delta wing. These asymmetric vortices can lead to high lateral forces even when slender delta wing is at the zero angle of yaw. Some experimental studies reported recently, cast considerable doubt as to the validity of the a...
متن کاملCorrosion Inhibition of Sodium Phosphate for Coarse and Near Ultrafined-Grain Mild steel surface
An ultrafine grain surface layer with average crystallite size of 28 nm was produced on annealed mild steel through a wire brushing process. The effects of grain size reduction on the inhibition performance of sodium phosphate were investigated using polarization and electrochemical impedance spectroscopy (EIS) measurements. The crystal grain size of wire brushed surface was analyzed by X-ray d...
متن کاملExperimental Investigation of Surface Roughness and Kerf Width During Machining of Blanking Die Material on Wire Electric Discharge Machine
Wire electric discharge machine (WEDM) is spark erosion in unconventional machining technique to cut hard and the conductive material with a wire as an electrode. The blanking die material SKD 11 is a high carbon and high chromium tool steel with high hardness and high wearing resistance property. This tool steel has broad application in press tools and dies making industries. In this research ...
متن کامل