A 3D Numerical Method for Studying Vortex Formation Behind a Moving Plate
نویسندگان
چکیده
In this paper, we introduce a three-dimensional numerical method for computing the wake behind a flat plate advancing perpendicular to the flow. Our numerical method is inspired by the panel method of J. Katz and A. Plotkin [J. Katz and A. Plotkin, Low-speed Aerodynamics, 2001] and the 2D vortex blob method of Krasny [R. Krasny, Lectures in Appl. Math., 28 (1991), pp. 385–402]. The accuracy of the method will be demonstrated by comparing the 3D computation at the center section of a very high aspect ratio plate with the corresponding two-dimensional computation. Furthermore, we compare the numerical results obtained by our 3D numerical method with the corresponding experimental results obtained recently by Ringuette [M. J. Ringuette, Ph.D. Thesis, 2004] in the towing tank. Our numerical results are shown to be in excellent agreement with the experimental results up to the so-called formation time.
منابع مشابه
Direct Numerical Simulation of the Wake Flow Behind a Cylinder Using Random Vortex Method in Medium to High Reynolds Numbers
Direct numerical simulation of turbulent flow behind a cylinder, wake flow, using the random vortex method for an incompressible fluid in two dimensions is presented. In the random vortex method, the primary variable is vorticity of the flow field. After generation on the cylinder wall, it is followed in two fractional time step in a Lagrangian system of coordinates, namely convection and diffu...
متن کاملNumerical Simulation of the Wake Flow Behind an Ellipse using Random Vortex Method (RESEARCH NOTE)
Direct numerical simulation of the wake flow around and behind a planar ellipse using a random vortex method is presented. Fluid is considered incompressible and the aspect ratios of ellipse and the angles of attacks are varied. This geometry can be a logical prelude to the more complex geometries, but less time dependent experimental measurements are available to validate the numerical results...
متن کاملOff-centred immobile magnetic vortex
Formation of the ‘dip’ structure which foregoes switching of magnetic vortex polarity is studied numerically in magnetic nanodisc. A new method based on influence of the spin-transfer torque is used. The method allows one to obtain the dip structure for immobile vortex which significantly improves studying accuracy in comparison with the case of moving vortex. Free out-of-plane vortices as well...
متن کاملEffects Of Frequency Variation At Inlet Flow On The Vortex Shedding Frequency Behind A Circular Cylinder
In many applications the flow that past bluff bodies has frequency nature (oscillated) and it is not uniform. This kind of flow has effects on the formation of vortex shedding behind bluff bodies. In this paper the flow around a circular cylinder was numerically simulated. The effects of frequency variation at inlet flow on the vortex shedding frequency were investigated. The transient Two-Dime...
متن کاملVibration and Stability of Axially Moving Plates by Standard and Spectral Finite Element Methods
Based on classical plate theory, standard and spectral finite element methods are extended for vibration and dynamic stability of axially moving thin plates subjected to in-plane forces. The formulation of the standard method earned through Hamilton’s principle is independent of element type. But for solving numerical examples, an isoparametric quadrilateral element is developed using Lagrange ...
متن کامل