Red, Green and Blue Silicate Phosphor Thin Films by Pulsed Laser Deposition
نویسنده
چکیده
Three kinds of silicate phosphor thin films, emitting in the red-green-blue (RGB) primary colors, were fabricated by pulsed laser deposition: manganese and lead doped calcium silicate (CaSiO3:MnPb) for red color, manganese doped zinc silicate (Zn2SiO4:Mn) for green color, and cerium doped yttrium silicate (Y2SiO5:Ce) for blue color. A good correlation was found between photoluminescence intensity and film crystallinity and surface morphology.
منابع مشابه
Longitudinal Magneto-Optical Kerr Effect in Ce:YIG Thin Films Incorporating Gold Nanoparticles
We report an experimental study on optical and magneto-optical properties of Cesubstituted yttrium iron garnet thin films incorporating gold nanoparticles. Au nanoparticles were formed by heating Au thin film on cubic quartz and garnet substrate in vacuum chamber and a Ce:YIG layer was deposited on them by the aid of Pulsed laser deposition method. A large enhancement of the longitudinal Kerr e...
متن کاملTunable Schottky Barrier in Photovoltaic BiFeO3 Based Ferroelectric Composite Thin Films
We examine the photo-assisted polarization loop in a BiFeO3 thin film under UV light illumination. BiFeO3 thin film prepared by pulsed laser deposition method onto the BaTiO3 thin film and the polarization behavior has been measured under poling voltage. Our results show the engineered polarization due to controllable schottky barrier under inverse poling voltage. This control on schottky barri...
متن کاملDependence of Magnetic Properties on Laser Ablation Conditions for Epitaxial La_{0.6}Sr_{0.4}MnO_{3} Thin Films Grown by Pulsed Laser Deposition
Epitaxial La0:6Sr0:4MnO3 (LSMO) thin films were grown by pulsed laser deposition. Relationships between magnetic properties of LSMO epitaxial thin films and ablation conditions such as ablated spot area and total incident laser energy in a pulsed laser deposition technique were studied. Ablated spot area was controlled by changing the focus lens position and total laser energy. Epitaxial growth...
متن کاملOrientation of MgO thin films on Si(001) prepared by pulsed laser deposition
Pulsed laser deposition method was employed to grow MgO thin films with preferred orientation on bare Si(100) and SiO2/Si(100) substrates. The orientation of MgO thin films was systematically investigated by varying deposition parameters. XRD analysis showed that the preferred orientation of MgO thin films would change from (111) to (100) when laser fluence decreased and oxygen pressure increas...
متن کاملGrowth of Gallium Oxide Nanowires by Pulsed Laser Deposition
We report on the synthesis of gallium oxide nanowires by pulsed laser deposition using a gold catalyst. In the vapor-liquid-solid process, gold thickness was the crucial parameter for deciding the morphology of nanowires. In the case of 1 nm thick gold, homogeneous nanowire growth was confirmed at temperatures of 700 ̊C to 850 ̊C. Transmission electron microscopy and selected area electron diffra...
متن کامل