Mechanical Production of [b], [m] and [w] Using Controlled Labial and Velopharyngeal Gestures

نویسنده

  • Takayuki Arai
چکیده

As an extension of a series of models we have developed, a mechanical bent vocal-tract model with nasal cavity was proposed for educational and clinical applications, as well as for understanding human speech production. Although our recent studies have focused on flap and approximant sounds, this paper introduced a new model for the consonants [b], [m] and [w]. Because the articulatory gesture of approximants is slow compared to the more rapid movement of plosives, in our [b] and [m] model, the elastic force of a spring is applied to affect the movement of the lower lip block, as was done for flap sounds in our previous studies. The main difference between [b] and [m] is in the velopharyngeal port, which is closed for [b] and open for [m]. In this study, we concluded that 1) a slower manipulation of the lip block is needed for [w], while 2) [b] and [m] require a faster movement, and finally, 3) close-open coordination of the lip and velopharyngeal gestures is important for [m].

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Integrated Mechanical Model of [r]-[l] and [b]-[m]-[w] Producing Consonant Cluster [br]

We have developed two types of mechanical models of the human vocal tract. The first model was designed for the retroflex approximant [r] and the alveolar lateral approximant [l]. It consisted of the main vocal tract and a flapping tongue, where the front half of the tongue can be rotated against the palate. When the tongue is short and rotated approximately 90 degrees, the retroflex approximan...

متن کامل

Investigation on Wear Behavior of W-Cu Nanocomposite Fabricated Through Thermochemical Synthesis

In this work, homogeneous thermochemical co-precipitation method was used to fabricate W-25wt%Cu nanocomposite. Synthesized nanocomposite powder was calcined and reduced. A hydrogen atmosphere sintering at 1200oC for 105 consolidated the product up to a density close to 98% theoretical density. Wear experiment were carried out using a pin-ondisc set up at three normal loads of 5, 10 and 15 N an...

متن کامل

Investigation on Wear Behavior of W-Cu Nanocomposite Fabricated Through Thermochemical Synthesis

In this work, homogeneous thermochemical co-precipitation method was used to fabricate W-25wt%Cu nanocomposite. Synthesized nanocomposite powder was calcined and reduced. A hydrogen atmosphere sintering at 1200oC for 105 consolidated the product up to a density close to 98% theoretical density. Wear experiment were carried out using a pin-ondisc set up at three normal loads of 5, 10 and 15 N an...

متن کامل

Effect of Thickness on Fracture Toughness of Al6061-Graphite

This research work presents the study on fracture behavior of Al6061 with graphite particulate composite produced by the stir casting technique. The materials selected for the proposed work is Al6061 and graphite particles. Compact tension (CT) specimens were utilized to determine fracture toughness for different thickness of composite. In the present work, optimizing the parameters of the comp...

متن کامل

THE FEASIBILITY STUDY OF W-Cu COMPOSITE PRODUCTION BY SUBMICRON PARTICLES ADDITION AND INFILTRATION

In this paper the feasibility of fabricating controlled porous skeleton of pure tungsten at low temperature by addition of submicron particles to tungsten powder (surface activated sintering) has been studied and the best parameters for subsequent infiltration of Cu were acquired. The effects of addition of submicron particles and sintering temperature on porous as well as infiltrated samples w...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016