Triple Band Circular Patch Microstrip Antenna with Superstrate
نویسندگان
چکیده
A novel compact triple band slit cut circular patch antenna with superstrate is proposed; slits on the patch provide additional resonances. The superstrate (cover) of dielectric layer provides protection to printed circuit antenna from environmental hazards due to abnormal weather conditions. The slits add two resonances in the resonance of a circular patch to achieve triple band antenna for multi services. The dielectric superstrate or cover above the microstrip patch causes the change in fringing fields between the patch and ground plane. The change in fringing field is accounted to calculate the effective relative permittivity. The effective permittivity is considered to evaluate the changes in resonance frequency due to superstrate. The various parameters of the antenna have been investigated and the antenna is simulated on Ansoft’s HFSS software simulator. A prototype of antenna is fabricated to confirm the return loss by measurement using the Agilent Technologies’ N5230A PNA-L S. K. Gupta Department of Electronics Engineering, Ambedkar Polytechnic, Govt. of Delhi, Shakarpur, Delhi 110092, India e-mail: [email protected] S. K. Gupta Department of Electronics Engineering, Uttarakhand Technical University, Dehradun, India A. Sharma · B. K. Kanaujia (B) Department of Electronics and Communication Engineering, Ambedkar Institute of Advanced Communication Technologies and Research, Geeta Colony, Delhi 110031, India e-mail: [email protected]; [email protected] A. Sharma e-mail: [email protected] G. P. Pandey Department of Electronics and Communication Engineering, Maharaja Agrasen Institute of Technology, Delhi, India e-mail: [email protected] G. P. Pandey Department of Electronics Engineering, Uttarakhand Technical University, Dehradun, India
منابع مشابه
Determination of Resonance Frequency of Dominant and Higher Order Modes in Thin and Thick Circular Microstrip Patch Antennas with Superstrate by MWM (RESEARCH NOTE)
An accurate model named as the Modified Wolff Model (MWM) is presented as an efficient CAD tool for determination of resonant frequency of the dominant and higher order modes under the multi-layer condition in thin and thick circular microstrip patch antennas. The effects of dielectric cover on the resonant frequency obtained from MWM have been compared against the result of theoretical method ...
متن کاملMicrostrip Antenna Gain Enhancement using Near Zero Refractive Index Metamaterials
Some useful features of microstrip patch antennas are low profile, low weight and easy fabrication. However this type of antenna suffers from having a low gain, caused by propagation surface waves. In this paper, a new near zero refractive index metamaterial (MTM) unit cell is designed and fabricated as a superstrate over a Rectangular Microstrip Patch Antennas (RMPA). In order to obtain a maxi...
متن کاملInvestigation of Cavity Reflex Antenna Using Circular Patch Type Fss Superstrate
Cavity reflex antenna (CRA) employing a circular patch type FSS (Frequency Selective Surface) superstrate is investigated. Analysis in terms of gain, bandwidth (impedance and gain) and radiation pattern has been presented. The aim of this work was to study low profile CRA having very thin superstrate sizes. In this CRA a circular patch antenna is used as a feeding source. The circular patch typ...
متن کاملA Dual Band Microstrip Patch Antenna for WLAN and WiMAX Applications
In this paper, the design of a microstrip patch antenna with frequency selective surface (FSS) as a superstrate for WLAN and WiMAX applications proposed antenna is designed by using substrate FR4 having permittivity of 4.4 and air substrate. The characteristics of the antenna are designed and evaluated the performance of modelled antenna using CST Microwave studio. The proposed resonant frequen...
متن کاملEnhancement of Inset Feed Microstrip Semicircular Patch Antenna Directivity using Dielectric Superstrate
The subject of enhancing microstrip patch antennas directivity, using either a frequency selective surface (FSS) or a double-negative (DNG) metamaterial slab, has been investigated by a number of researchers in recent years. The purpose of this paper is to show that we can also achieve the same goal by using a much simpler design for the superstrate, namely a dielectric slab, whose performance ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Wireless Personal Communications
دوره 77 شماره
صفحات -
تاریخ انتشار 2014