Area and Speed Efficient Implementation of Symmetric FIR Digital Filter through Reduced Parallel LUT Decomposed DA Approach

This brief proposes an area and speed efficient implementation of symmetric finite impulse response (FIR) digital filter using reduced parallel look-up table (LUT) distributed arithmetic (DA) based approach. The complexity lying in the realization of FIR filter is dominated by the multiplier structure. This complexity grows further with filter order, which results in increased area, power, and reduced speed of operation. The speed of operation is improved over multiply-accumulate approach using multiplier less conventional DA based design and decomposed DA based design. Both the structure requires B clock cycles to get the filter output for the input width of B, which limits the speed of DA structure. This limitation is addressed using parallel LUTs, called high speed DA FIR, at the expense of additional hardware cost. With large number of taps, the number of LUTs and its size also becomes large. In the proposed method, by exploiting coefficient symmetry property, the number of LUTs in the decomposed DA form is reduced by a factor of about 2. This proposed approach is applied in high speed DA based FIR design, to obtain area and speed efficient structure. The proposed design offers around 40% less area and 53.98% less slice-delay product (SDP) than the high throughput DA based structure when it’s implemented over Xilinx Virtex-5 FPGA device-XC5VSX95T-1FF1136 for 16-tap symmetric FIR filter. The proposed design on the same FPGA device, supports up to 607 MHz input sampling frequency, and offers 60.5% more speed and 67.71% less SDP than the systolic DA based design.