Influence of Crystallization and Filler Degree on Viscoelastic Properties of Rubber Compounds
نویسندگان
چکیده
The dimensioning of injection heads for the extrusion of rubber profiles is exclusively based on empiric knowledge of the non-linear flow behavior of elastomers. Thus, the design of injection heads is carried out with subject to the used rubber compound, whereas the geometry of the appropriate profile is achieved by empiric adaptation of the extrusion die. This was one of the motivations for a research project concerning the experimental and numerical investigations of the viscoelastic material behavior of rubber compounds and rubber blends.
منابع مشابه
Influence of Different Fillers on Natural Rubber Composites to Assess Mechanical Performance
Effect of different fillers on natural rubber compounds was investigated through curing, mechanical properties and morphology studies for improving mechanical performance of rubber articles. In this work, natural rubber blends with Silica as Single-filler compounds, and blends with Silica and Carbon black as Bi-filler compounds were considered. Then, natural rubber blends with Silica, Carbon bl...
متن کاملInvestigation of structural, morphological and dynamic mechanical properties of unvulcanized PDMS/silica compound
In this study, the interaction between the silica filler and polydimethylsiloxanes (PDMS) was investigated from the aspects of the bound rubber and morphological characterization. With special attention to the dynamic properties, the dynamic test was conducted by dynamic shear rheometer. The results show that the modified fillers disperse uniformly within PDMS matrix without aggregation and con...
متن کاملCure Characteristics and Physico-mechanical Properties of the Stearic Acid Surface of Modified Calcium Carbonate Reinforcement NR/SBR Compounds
Calcium carbonate is a cheap and readily available filler used in rubber industry. This material is not compatible with rubber matrix, so many researchers have tried to modify its surface with various materials in order to increase its hydrophobicity and improve compatibility with the rubber matrix. In this effort, surface modification of calcium carbonate was carried out by 1.5%, 3% and 4% ste...
متن کاملEffect of carbon black and fly ash co-fillers content on mechanical and thermal behaviors of styrene butadiene rubber compounds
Fly ash (FA) is produced as a waste byproduct during the burning process of coal in thermal power plants whose cost is primarily associated to cleaning and transportation. It possesses mechanical properties on account of its constituents like silica and alumina. The use of FA as filler in styrene butadiene rubber (SBR) was of researchers’ interest to reinforce and/or to reduce product cost. In ...
متن کاملTensile and Physical Properties of Linear Low Density Polyethylene-natural Rubber Composite: Comparison between Size and Filler Types
Linear Low Density Polyethylene-Natural Rubber (LLDPE-NR) composites in the ratio of 70:20 were made with different loadings of nanosilica and micro-scale Palm Oil Fuel Ash (POFA). Linear Low Density Polyethylene grafted with maleic anhydride (LLDPE-g-MAH) of 10 wt% was added as a compatibiliser. The composites were produced by using two-roll mill machine. The tensile properties of the composit...
متن کامل