Status of Proton Beam Commissioning at the Medaustron Ion Beam Therapy Centre
نویسندگان
چکیده
The MedAustron accelerator (Wiener Neustadt, Austria) will deliver clinical beams of protons (60 250 MeV) and carbon ions (120 400 MeV/n) to three ion beam therapy irradiation rooms (IR). Clinical beams and proton beams up to 800 MeV will be provided in a fourth IR, dedicated to non-clinical research. A slow-extracted proton beam of maximum clinical energy reached for the first time the IR3 in October 2014, thus providing the technical proof-of-principle of the entire accelerator chain. The main characteristics of the MedAustron accelerator system are presented, along with the results obtained along the ongoing commissioning. INTRODUCTION MedAustron is a synchrotron-based ion beam therapy centre. The accelerator supports beam rigidities up to 6.4 Tm. The accelerator layout is shown in Fig. 1. Its design [1] originates from those of PIMMS [2] and CNAO [3]. The injector produces beams of H3 or C, which are chopped with a fast electrostatic deflector, then bunched and pre-accelerated to 7 MeV/n with a Radiofrequency Quadrupole (RFQ) and an IH-DTL linac. In the Medium Energy Beam Transfer line (MEBT), the beam is stripped to H or C before injection into the synchrotron. The synchrotron has a superperiod of 2 with non-dispersive regions for injection and the Radiofrequency (RF) cavity. After acceleration, the beam is extracted via the thirdinteger resonance in the High Energy Beam Transfer Line (HEBT). Since last year [4-5], the installation of accelerator components for proton treatments in the two horizontal beam lines of IR2 and IR3 has been completed and a first beam of protons at 62.5 MeV reached IR3 in October 2014. Beam commissioning is currently resuming and passing the torch to medical commissioning. INJECTOR AND MEBT The commissioning of the beam from the source to the end of the MEBT has been completed at the end of 2014 with very positive results, in terms of intensity, transmission and stability. The main contributors to this progress have been: the extensive work on the IH stability (cooling and setpoint adjustment), optimization of the IH quadrupole strengths, steering at the source exit and in the matching section between RFQ and linac and finally, the increase of the RFQ output energy. The appropriate choice of the operation point of the linac was critical in stabilizing the energy of the beam injected into the ring. A summary is shown in Table 1. Table 1: Results of Commissioning up to the MEBT Parameter Performance
منابع مشابه
Status of Medaustron the Austrian Ion Therapy and Research Centre
MedAustron is the Austrian center for hadron therapy and non-clinical research. The accelerator design is based on the PIMMS study [1] and features proton beams of up to 800 MeV and carbon ion beams of up to 400 MeV/u. The accelerator is currently being installed and the beam commissioning has started early 2013. The injector comprising three ECR sources, an RFQ and an IH-mode structure has alr...
متن کاملStatus of the Medaustron Ion Beam Therapy Centre
MedAustron is a synchrotron based light-ion beam therapy centre for cancer treatment as well as for clinical and non-clinical research currently in its construction phase. The accelerator design is based on the CERNPIMMS study [1] and its technical implementation by CNAO. This paper presents a status overview over the whole project detailing the achieved progress of the building construction & ...
متن کاملImpact of Various Beam Parameters on Lateral Scattering in Proton and Carbon-ion Therapy
Background: In radiation therapy with ion beams, lateral distributions of absorbed dose in the tissue are important. Heavy ion therapy, such as carbon-ion therapy, is a novel technique of high-precision external radiotherapy which has advantages over proton therapy in terms of dose locality and biological effectiveness.Methods: In this study, we used Monte Carlo method-based Geant4 toolkit to s...
متن کاملEuropean Organization for Nuclear Research Cern Beams Department
The MedAustron Ion therapy center will be constructed in Wiener Neustadt (Austria) in the vicinity of Vienna. Its accelerator complex consists of four ion sources, a linear accelerator, a synchrotron and a beam delivery system to the three medical treatment rooms and to the research irradiation room. The ion sources shall deliver beams of H3, C and light ions with utmost reliability and stabili...
متن کاملتطبیق پذیری باریکه -H در قسمت انرژی پایین و متوسط ماشین Linac4 در سرن
Linac4 is the near future 160 MeV H- linear accelerator of the CERN presently under construction. It will replace the present Linac2 as injector of the proton accelerator complex in CERN. The Linac4 is composed of a 45 keV ion source, a Low Energy Beam Transport (LEBT), a 352.2 MHz Radio Frequency Quadrupole (RFQ), which accelerates the beam to 3 MeV, and a Medium Energy Beam Transport (MEBT), ...
متن کامل