Influence of electric potentials on friction of sliding contacts lubricated by an ionic liquid.

نویسندگان

  • Christian Dold
  • Tobias Amann
  • Andreas Kailer
چکیده

Tribological investigations on the macroscopic scale revealed that friction can be influenced in situ by applying electric potentials, if electrically conductive fluid such as an ionic liquid is used as a lubricant. Enrichment of charged ions at a steel interface occurs by applying electric surface potentials in a three-electrode setup. As a consequence, the lubrication conditions change. It is supposed that electrically influenced surface adsorption and electrokinetic effects are the main mechanisms by which friction is varied.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Friction models for sliding dry, boundary and mixed lubricated contacts

Friction, lubrication, and wear have a strong influence on the performance and behavior of mechanical systems. This paper deals with different friction models for sliding contacts running under different conditions. The models presented are suited to different situations, depending on the type of contact, running conditions, and the behavior of interest. The models will be discussed from simula...

متن کامل

Friction reduction in lubricated-MEMS with complex slip surface pattern

Many types of micro-electro-mechanical-system (MEMS) based products are currently employed in a variety of applications. However, high friction in these systems is a problem which limits the development of MEMS devices in which sliding contacts are involved. The aim of this research is to evaluate the effect of boundary slip on the hydrodynamic friction in a low load lubricated MEMS, in particu...

متن کامل

Tribological behaviors of several polymer–polymer sliding combinations under dry friction and oil-lubricated conditions

The friction and wear properties of polyamide 66 (PA66), polyphenylene sulfide (PPS) and polytetrafluoroethylene (PTFE) sliding against hemselves under dry sliding and oil-lubricated conditions were studied by using a pin-on-disc tribometer. The effect of applied load and sliding peed on tribological behaviors of the polymer–polymer sliding combinations under dry sliding and oil-lubricated cond...

متن کامل

An analytical model of dynamic sliding friction during impact

Dynamic sliding friction was studied based on the angular velocity of a golf ball during an oblique impact. This study used the analytical model proposed for the dynamic sliding friction on lubricated and non-lubricated inclines. The contact area A and sliding velocity u of the ball during impact were used to describe the dynamic friction force Fd = λAu, where λ is a parameter related to the we...

متن کامل

Influence of roughness on contact interface in fretting under dry and boundary lubricated sliding regimes

This paper presents experimental results of wear process under dry and boundary lubricated metallic (AISI 1034/AISI 52100) contacting bodies with different surfaces morphologies subjected to a wide range of kinematic fretting conditions. Analysis of damage mode observed under such fretting conditions is elucidated in context of surfaces morphologies therefore associated with surface manufacturi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical chemistry chemical physics : PCCP

دوره 17 16  شماره 

صفحات  -

تاریخ انتشار 2015