Preparation of cationic polyacrylamide by aqueous two-phase polymerization
نویسندگان
چکیده
Cationic polyacrylamide (CPAM) was synthesized by aqueous two-phase polymerization technique using acrylamide (AM) and dimethylaminoethyl methacrylate methyl chloride (DMC) as raw materials, aqueous polyethylene glycol 20000 (PEG 20000) solution as dispersant, 2,2′-azobis(2-amidinopropane) dihydrochloride (V-50) as initiator and poly(dimethylaminoethyl methacrylate methyl chloride) (PDMC) as stabilizer. The polymer was characterized by infrared (IR) spectroscopy, 1H-NMR spectrum and transmission electron microscopy (TEM). The copolymer composition was analyzed. The effect of monomers concentration, PEG 20000 concentration and stabilizer concentration on copolymer were investigated, respectively. The optimum reaction conditions for obtaining a stable CPAM aqueous two-phase system were monomers concentration 8~15%, PEG 20000 concentration 15~25%, and PDMC concentration 0.5~1.5%. Finally, the formation process of copolymer particles was investigated by optical microscope.
منابع مشابه
Equilibrium Swelling Study of Cationic Acrylamide-Based Hydrogels: Effect of Synthesis Parameters, and Phase Transition in Polyelectrolyte Solutions
Cationic copolymer gels of acrylamide and [(methacrylamido) Propyl] trimethyl ammonium chloride (MAPTAC) were synthesized by free radical aqueous solution polymerization. The Taguchi method, a robust experimental design, was employed for the optimization of the synthesis based on the equilibrium swelling capacity of the hydrogels. Based on Taguchi method a standard L16 orthogonal array with fiv...
متن کاملA Cationic Polyacrylamide Dispersion Synthesis by Dispersion Polymerization in Aqueous Solution
A cationic polyacrylamide (CPAM) dispersion, the copolymer of acrylamide (AM) and acryloyloxyethyltrimethyl ammonium chloride (DAC), has been synthesized through dispersion polymerization in aqueous ammonium sulfate ((NH4)2SO4) solution. The polymerization was initiated by tert-butyl hydroperoxide (TBHP) and ferrisulfas (FeSO4) using poly(dimethyl diallyl ammonium chloride) (PDMDAAC) as the sta...
متن کاملPhotochemical Studies on Degradation of Cetyl Pyridinium Chloride (Cationic Surfactant) in Aqueous Phase Using Different Photocatalysts
The photocatalytic process using semiconductors with a nanostructure is one of the technologies usedfor the destructive oxidation of organic compounds such as surfactants. In this paper, thephotocatalytic degradation of Cetyl pyridinium chloride (CPC), was investigated in aqueous phaseusing various semiconductors such as titanium dioxide (Ti02), zinc oxide (ZnO), stannic oxide(Sn02). The degrad...
متن کاملMagnetic Solid Phase Extraction and Removal of Five Cationic Dyes from Aqueous Solution Using Magnetite Nanoparticle Loaded Platanusorientalis Waste Leaves
This paper reports on synthesis of a magnetic adsorbent for wastewater treatment purposes. In this regard, platanus orientalis waste leaves were chosen as a cheap material for preparing the magnetic adsorbent by loading magnetite nanoparticles on it. The synthesized adsorbent was characterized using scanning electron microscope and X-ray diffractometer. Then, it was used for magnetic solid phas...
متن کاملPhotoinitiated Polymerization of Cationic Acrylamide in Aqueous Solution: Synthesis, Characterization, and Sludge Dewatering Performance
A copolymer of acrylamide (AM) with acryloyloxyethyl trimethyl ammonium chloride (DAC) as the cationic monomer was synthesized under the irradiation of high-pressure mercury lamp with 2,2-azobis(2-amidinopropane) dihydrochloride (V-50) as the photoinitiator. The compositions of the photoinduced copolymer were characterized by Fourier transform infrared spectra (FTIR), ultraviolet spectra (UV), ...
متن کامل