Designing a Full Adder Circuit Based on Quasi-Floating Gate
نویسندگان
چکیده
Since in designing the full adder circuits, full adders have been generally taken into account, so as in this paper it has been attempted to represent a full adder cell with a significant efficiency of power, speed and leakage current levels. For this objective, a comparison between five full adder circuits has been provided. Applying floating gate technology and refresh circuits in the full adder cell lead to the reduction of leakage current on the gate node. The simulations were accomplished in this paper, through HSPICE software and 65 nm CMOS technology. The simulation results indicate the considerable efficiency of power consumption, speed and leakage current in the full adder cell rather than other cells.
منابع مشابه
Design of Gate-Driven Quasi Floating Bulk OTA-Based Gm–C Filter for PLL Applications
The advancement in the integrated circuit design has developed the demand for low voltage portable analog devices in the market. This demand has increased the requirement of the low-power RF transceiver. A low-power phase lock loop (PLL) is always desirable to fulfill the need for a low power RF transceiver. This paper deals with the designing of the low power transconductance- capacitance (Gm-...
متن کاملPresenting a New Efficient QCA Full Adder Based on Suggested MV32 Gate
Quantum-dot Cellular Automata (QCA) technology is a solution for implementation of the nanometer sized circuits and it can be a suitable replacement for CMOS. Similar to CMOS technology, designing the basic computational element such as adder with the QCA technology is regarded as one of the most important issues that extensive researches have been done about it. In this paper, a new eff...
متن کاملSynthesis and Designing of Reversible Adder/Subtracter Circuits
Reversible logic circuits have emerged as a promising technology having its applications in low power CMOS, Quantum Computing, nanotechnology, and optical computing. Power is the major constraint for any circuit Each circuit demands not only low power, but fast speed. This paper is focused on the efficient design of the full Adder/Subtractor with the help of half adder subtractor with single co...
متن کاملNovel Reconfigurable Two-MOSFET UV-programmable Floating-Gate Circuits for CARRY’, NAND, NOR or INVERT functions
This article presents two new, reconfigurable multifunction floating-gate circuit to produce either the INVERTED CARRY function for a FULL-ADDER, an INVERTER, or two-input NAND or NOR gates. The circuits contains two MOSFETs and three or four capacitively coupled input signals. SPICE simulations are shown, demonstrating the principal operation, together with preliminary measurements indicating ...
متن کاملA Novel Design of Reversible Multiplier Circuit (TECHNICAL NOTE)
Adders and multipliers are two main units of the computer arithmetic processors and play an important role in reversible computations. The binary multiplier consists of two main parts, the partial products generation circuit (PPGC) and the reversible parallel adders (RPA). This paper introduces a novel reversible 4×4 multiplier circuit that is based on an advanced PPGC with Peres gates only. Ag...
متن کامل