Effect of Surface-Modification of Indium Tin Oxide Particles on Their Electrical Conductivity
نویسندگان
چکیده
The present work reports an effect of surfacemodification of indium tin oxide (ITO) particles with chemicals on their electronic conductivity properties. Examined chemicals were polyvinyl alcohol (nonionic polymer), poly(diallyl dimethyl ammonium chloride) (cationic polymer), poly(sodium 4-styrene-sulfonate) (anionic polymer), (2-aminopropyl) trimethoxy silane (APMS) (silane coupling agent with amino group), and (3-mercaptopropyl) trimethoxy silane (MPS) (silane coupling agent with thiol group). For all the examined chemicals, volume resistivities of surface-modified ITO particles did not increase much when they were aged in air at 80 oC, compared to a volume resistivity of un-surface-modified ITO particles. Increases in volume resistivities of ITO particles surface-modified with the silane coupling agents were smaller than those with the polymers, since hydrolysis of the silane coupling agents and condensation of generated silanol and OH groups on ITO particles took place to provide efficient immobilization of them on particles. The APMS gave an increase in volume resistivity smaller than the MPS, since a larger solubility in water of APMS providing a larger amount of APMS immobilized on particles. Keywords—Indium tin oxide, particles, surface-modification, volume resistivity.
منابع مشابه
Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates
Structural, electrical and optical properties of indium tin oxide or ITO (In2O3:SnO2) thin films on different substrates are investigated. A 100-nm-thick pre-deposited zinc oxide (ZnO) buffer layer is utilized to simultaneously improve the electrical and optical properties of ITO films. High purity ZnO and ITO layers are deposited with a radio frequency sputtering in argon ambient with plasma p...
متن کاملInvestigation of Effect of Accumulation Layer Thickness of ENZ material on Electro-Absorption Modulator
In this paper, the performance of an optical modulator based on indium tin oxide is investigated at telecommunication wavelength for different accumulation thickness. The plan of metal-oxide-semiconductor is utilized to change the carrier concentration at indium tin oxide-hafnium oxide interface. An optical mode solver based finite element method has been used to calculate the basic parameters ...
متن کاملModification of Conductive Polymer for Polymeric Anodes of Flexible Organic Light-Emitting Diodes
A conductive polymer, poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), was modified with dimethyl sulfoxide (DMSO) in solution state, together with sub-sequential thermal treatment of its spin-coated film. The electrical conductivity increased by more than three orders of magnitude improvement was achieved. The mechanism for the conductivity improvement was studied at nanos...
متن کاملSynthesis and Morphology Study of Nano-Indium Tin Oxide (ITO) Grains
In this paper, indium tin oxide (ITO) nanoparticles has been prepared by chemical methods under given conditions with solution of indium chloride (InCl3·4H2O), tin chloride (SnCl4·5H2O) in ammonia solution. The samples were characterized by X-ray Diffraction (XRD) and scanning electron microscopy (SEM) analyses after heat treatments. The SEM results showed that, the size of the ITO particles pr...
متن کاملSynthesis and Morphology Study of Nano-Indium Tin Oxide (ITO) Grains
In this paper, indium tin oxide (ITO) nanoparticles has been prepared by chemical methods under given conditions with solution of indium chloride (InCl3·4H2O), tin chloride (SnCl4·5H2O) in ammonia solution. The samples were characterized by X-ray Diffraction (XRD) and scanning electron microscopy (SEM) analyses after heat treatments. The SEM results showed that, the size of the ITO particles pr...
متن کامل