NCHRP Report 507 – Load and Resistance Factor Design (LRFD) for Deep Foundations
نویسنده
چکیده
منابع مشابه
Development of Geotechnical Resistance Factors and Downdrag Load Factors for LRFD
NOTICE The contents of this report reflect the views of the author, who is responsible for the facts and accuracy of the data presented herein. The contents do not necessarily reflect policy of the Department of Transportation. This report does not constitute a standard, specification, or regulation. Abstract This report summarizes the historical development of the resistance factors developed ...
متن کاملRefinement of Strut-and-Tie Model for Reinforced Concrete Deep Beams
Deep beams are commonly used in tall buildings, offshore structures, and foundations. According to many codes and standards, strut-and-tie model (STM) is recommended as a rational approach for deep beam analyses. This research focuses on the STM recommended by ACI 318-11 and AASHTO LRFD and uses experimental results to modify the strut effectiveness factor in STM for reinforced concrete (RC) de...
متن کاملAN OPTIMIZATION-BASED COMPARATIVE STUDY OF DOUBLE LAYER GRIDS WITH TWO DIFFERENT CONFIGURATIONS USING CUCKOO SEARCH ALGORITHM
This paper is concerned with the economical comparison between two commonly used configurations for double layer grids and determining their optimum span-depth ratio. Two ranges of spans as small and big sizes with certain bays of equal length in two directions and various types of element grouping are considered for each type of square grids. In order to carry out a precise comparison between ...
متن کاملReliability of Shallow Foundations Designed Against Bearing Failure Using LRFD
There is a growing interest world-wide in the development of a rational reliability-based geotechnical design code. The reason for this interest is a least two-fold; first of all, geotechnical engineers face uncertainties which are commonly significantly larger than those faced in other fields of engineering and so there is a need to properly characterize and deal with this uncertainty. Secondl...
متن کاملA COMPARATIVE STUDY FOR THE OPTIMAL DESIGN OF STEEL STRUCTURES USING CSS AND ACSS ALGORITHMS
In this article, an Advanced Charged System Search (ACSS) algorithm is applied for the optimum design of steel structures. ACSS uses the idea of Opposition-based Learning and Levy flight to enhance the optimization abilities of the standard CSS. It also utilizes the information of the position of each charged particle in the subsequent search process to increase the convergence speed. The objec...
متن کامل