Low Dark-Current, High Current-Gain of PVK/ZnO Nanoparticles Composite-Based UV Photodetector by PN-Heterojunction Control
نویسندگان
چکیده
We propose a solution-processable ultraviolet (UV) photodetector with a pn-heterojunction hybrid photoactive layer (HPL) that is composed of poly-n-vinylcarbazole (PVK) as a p-type polymer and ZnO nanoparticles (NPs) as an n-type metal oxide. To observe the effective photo-inducing ability of the UV photodetector, we analyzed the optical and electrical properties of HPL which is controlled by the doping concentration of n-type ZnO NPs in PVK matrix. Additionally, we confirmed that the optical properties of HPL dominantly depend on the ZnO NPs from the UV-vis absorption and the photoluminescence (PL) spectral measurements. This HPL can induce efficient charge transfer in the localized narrow pn-heterojunction domain and increases the photocurrent gain. It is essential that proper doping concentration of n-type ZnO NPs in polymer matrix is obtained to improve the performance of the UV photodetector. When the ZnO NPs are doped with the optimized concentration of 3.4 wt.%, the electrical properties of the photocurrent are significantly increased. The ratio of the photocurrent was approximately 10³ higher than that of the dark current.
منابع مشابه
Fast UV detection by Cu-doped ZnO nanorod arrays chemically deposited on PET substrate
Well-aligned Cu-doped ZnO nanorods were successfully synthesized on polyethylene terephthalate (PET) substrate using chemical bath deposition method. The structural and optical properties of Cu-doped ZnO nanorods were investigated using X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX) and photoluminescence (PL) spectroscopy...
متن کاملFabrication of Ultraviolet Photodetector Based on ZnO Nanostructures and Calcium Impurities Using Sol-Gel Method
In this paper an ultraviolet (UV) photodetector has been fabricated using ZnO nanostructures. The cheap fabrication process, high-quality nanostructures and the desired results for the photodetector are the most important characteristics of the proposed method. ZnO nanostructures have been grown using sol-gel method. In order to increase the sensitivity, calcium impurities have been added to na...
متن کاملLow Noise, High Detectivity Photodetectors based on Organic Materials
Organic photodetectors (OPDs) are potentially useful in many applications because of their light weight, flexibility and good form factors. Despite the high detectivities that have been frequently reported for OPDs recently, the application of these OPDs for weak light detection has been rarely demonstrated. In this thesis, low noise, high gain photodetectors based on organic and ZnO nanopartic...
متن کاملImpressive Reduction of Dark Current in InSb Infrared Photodetector to achieve High Temperature Performance
Infrared photo detectors have vast and promising applications in military,industrial and other fields. In this paper, we present a method for improving theperformance of an infrared photodetector based on an InSb substance. To achieve goodperformance at high temperatures, thermal noise and intrusive currents should bereduced. For this purpose, a five-layer hetero structu...
متن کاملReduction of persistent photoconductivity in ZnO thin film transistor-based UV photodetector
We report a ZnO-based thin film transistor UV photodetector with a back gate configuration. The thin-film transistor (TFT) aspect ratio W/L is 150 lm/5 lm and has a current on-off ratio of 10. The detector shows UV-visible rejection ratio of 10 and cut-off wavelength of 376 nm. The device has low dark current of 5 10 14 A. The persistent photoconductivity is suppressed through oxygen plasma tre...
متن کامل