SPDT RF MEMS Switch U Voltage And Based On Dua Capacitive MEMS
نویسنده
چکیده
A coplanar waveguide (CPW) single-pole double-throw (SPDT) X-band RF MEMS switch that can be actuated between states by applying a single voltage is introduced. Since a signal can be transmitted to one of the output ports without biasing, this has the potential to reduce the complexity of the required biasing network. The switch consists of a series and a shunt capacitive MEMS switch separated by a quarter wavelength transmission line. The shunt switch section was fabricated and measured separately and shown to have an insertion loss of 0.25 dB and isolation of 33 dB at 10 GHz. A SPDT 3-port switch was fabricated and port isolations of about 15 dB and an insertion loss of 1 dB were obtained in the up-state. In the down-sate, 40 dB of isolation with a 1 dB insertion loss were measured. The actuation voltage was 35 V.
منابع مشابه
Design and simulation of a RF MEMS shunt capacitive switch with low actuation voltage, low loss and high isolation
According to contact type, RF MEMS switches are generally classified into two categories: Capacitive switches and Metal-to-Metal ones. The capacitive switches are capable to tolerate a higher frequency range and more power than M-to-M switches. This paper presents a cantilever shunt capacitive RF MEMS switch with characteristics such as low trigger voltage, high capacitive ratio, short switchin...
متن کاملDesign and Simulation of RF MEMS Capacitive type Shunt Switch & its Major Applications
This article details about the design of a K-band RF-MEMS capacitive type shunt switch and some of its major applications. The electrostatic and electromagnetic analyses of the designed structure have been performed using MATLAB and commercially available EM solvers. FEM and MOM both tools have been used extensively for full-wave analysis. Two major applications (SPDT switch and reconfigurable ...
متن کاملStudy and Analysis of Rf Mems Shunt Switch for Reconfigurable Antenna
RF MEMS switches can be used to achieve reconfigurability of various RF systems and in particularly for miniaturized antenna structures. In case of micro machined antennas, which involve low voltage signals, RF MEMS switches with low actuation voltage are required for achieving reconfigurability. The capacitive shunt switch derives its switching property from the significant difference of its c...
متن کاملCompact Model of Dielectric Charging in RF MEMS Capacitive Switches
RF MEMS capacitive switches show great potential for use in wireless communication device. However, their widespread insertion in commercial products requires further improvements in their longterm reliability. Dielectric charging is one of the factors that impact switch reliability. Dielectric charging is understood to mean the accumulation of electric charge in the insulating dielectric layer...
متن کاملMechanical Design of RF MEMS Capacitive Switches
This paper analyses the mechanical behaviour of various suspensions of electrostatically actuated RF MEMS switches. A family of capacitive switches is described, with suspensions varying step by step from cantilevers to meander shaped double clamped beams. The result is a capacitive shunt switch with a designed actuation voltage of 4.5 V, and 20dB isolation and 0.04 dB insertion loss at a fre...
متن کامل