“Compensation of Reactive Power Using D-STATCOM”
نویسندگان
چکیده
The D-STATCOM is a shunt connected FACTS device which supplies reactive power to the load to improve the voltage stability of the load busses. The D-STAT COM in multi bus system is capable of reducing the losses and improving the voltage regulation.This work deals with comparison of Push Pull and Voltage Inverter based D-STATCOM for multi bus system. Eight bus system is modeled using the elements of SIMULINK. The models are developed for eight bus system with and without D-STATCOM. The two DSTATCOM systems are compared with respect to total harmonic distortion and reactive power comparison. The D-STATCOM is studied with respect to the voltage stability improvement at the load busses. The results of VSI based D-STATCOM system are compared with those of Push pull inverter based D-STATCOM system.
منابع مشابه
A Comparison between SVC and STATCOM in Flicker Mitigation of Electric Arc Furnace using Practical Recorded Data
Electric arc furnace (EAF) is one of the largest loads in electric power systems. It is highly time varying and nonlinear. Its reactive power variations cause voltage fluctuations in nearby system which is known as flicker. On the other hand the nonlinear voltage-current characteristic causes strong voltage and current harmonics in EAF. To this end Flexible AC Transmission Systems (FACTS) techn...
متن کاملDesign and Performance Analysis of D-STATCOM for Non-linear Load Composite Compensation
This paper investigates the design,analysis and simulation of a Distribution-STATic COMpensator(D-STATCOM) for non-linear load Composite(harmonic and reactive power) compensation on a three phase bus network. Composite compensation is achieved by implementation of a p-q controller, which monitors the load current and injects equal amplitude and opposite phase compensation currents to neutralize...
متن کاملGenetically Tuned STATCOM for Voltage Control and Reactive Power Compensation
345 Abstract—In this paper Static Synchronous Compensator (STATCOM) is used for voltage stability and the compensation of reactive power. The STATCOM contains an Insulated Gate Bipolar Transistor (IGBT) based voltage source converter for voltage control and reactive power compensation. The STATCOM is used to control the reactive power with the voltage source converter in combination with a DC v...
متن کاملCoordinated control ULTC power transformer with STATCOM for Voltage Control and Reactive Power Compensation
The static synchronous compensator (STATCOM) is one type of FACTS devices which resembles in many respects a rotating synchronous condenser used for voltage control and reactive power compensation. The STATCOM can increase transmission capacity, damping low frequency oscillation, and improving voltage stability. This paper presents a control block diagram of STATCOM for the voltage stability im...
متن کاملCascaded Control of Multilevel Converter based STATCOM for Power System Compensation of Load Variation
The static synchronous compensator (STATCOM) is used in power system network for improving the voltage of a particular bus and compensate the reactive power.It can be connected to particular bus as compensating device to improve the voltage profile and reactive power compensation. In this paper, a multi function controller is proposed and discussed. The control concept is based on a linearizati...
متن کامل