Real time phase detection based online monitoring of batch fermentation processes

نویسندگان

  • Soumen K. Maiti
  • Rajesh K. Srivastava
  • Mani Bhushan
  • Pramod P. Wangikar
چکیده

Industrial fermentations conducted in a batch or semi-batch mode demonstrate significant batch-tobatch variability. Current batch process monitoring strategies involve manual interpretation of highly informative but low frequency offline measurements such as concentrations of products, biomass and substrates. Fermentors are also fitted with computer interfaced instrumentation, enabling high frequency online measurements of several variables and automated techniques which can utilize this data would be desirable. Evolution of a batch fermentation, which typically uses complex medium, can be conceptualized as a sequence of several distinct metabolic phases. Monitoring of batch processes can then be achieved by detecting the phase change events, also termed as singular points (SP). In this work, we propose a novel moving window based real-time monitoring strategy for SP detection based only on online measurements. The key hypothesis of the strategy is that the statistical properties of the online data undergo a significant change around an SP. The strategy is easily implementable and does not require past data or prior knowledge of the number or time of occurrence of SPs. The efficacy of the proposed approach has been demonstrated to be superior compared to that of reported techniques for industrially relevant model organisms. The proposed approach can be used to decide offline sampling timings in real time.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Online monitoring of multi-phase batch processes using phase-based multivariate statistical process control

Batch and semi-batch modes of production are common in a number of high value-added industries including specialty chemicals, pharmaceuticals, and biologics. Online monitoring of such processes seeks to detect run-to-run deviations, anomalies or faulty conditions by analyzing real-time measurements so that they can be corrected quickly and the batch recovered. Multivariate statistical methods h...

متن کامل

Monitoring of Batch Pharmaceutical Fermentations: Data Synchronization, Landmark Alignment, and Real-time Monitoring

Most batch pharmaceutical fermentations have successive phases of operation. Detection of process phase landmarks is important for improving the performance of process monitoring and control. This study considers techniques for adjustment of batch data lengths to match landmarks of phases during the progress of the batch. Time synchronization and landmark alignment techniques are presented and ...

متن کامل

Multivariate statistical monitoring of two-dimensional dynamic batch processes utilizing non-Gaussian information

Dynamics are inherent characteristics of batch processes, and they may exist not only within a particular batch, but also from batch to batch. To model and monitor such two-dimensional (2D) batch dynamics, two-dimensional dynamic principal component analysis (2D-DPCA) has been developed. However, the original 2D-DPCA calculates the monitoring control limits based on the multivariate Gaussian di...

متن کامل

Iterative learning model predictive control for multi-phase batch processes

Multi-phase batch process is common in industry, such as injection molding process, fermentation and sequencing batch reactor; however, it is still an open problem to control and analyze this kind of processes. Motivated by injection molding processes, the multi-phase batch process in each cycle is formulated as a switched system with internally forced switching instant. Controlling multi-phase...

متن کامل

Online Fault Detection and Isolation Method Based on Belief Rule Base for Industrial Gas Turbines

Real time and accurate fault detection has attracted an increasing attention with a growing demand for higher operational efficiency and safety of industrial gas turbines as complex engineering systems. Current methods based on condition monitoring data have drawbacks in using both expert knowledge and quantitative information for detecting faults. On account of this reason, this paper proposes...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009