Non-Sterilized Fermentative Production of Polymer-Grade L-Lactic Acid by a Newly Isolated Thermophilic Strain Bacillus sp. 2–6

BACKGROUND The demand for lactic acid has been increasing considerably because of its use as a monomer for the synthesis of polylactic acid (PLA), which is a promising and environment-friendly alternative to plastics derived from petrochemicals. Optically pure L-lactic acid is essential for polymerization of PLA. The high fermentation cost of L-lactic acid is another limitation for PLA polymers to compete with conventional plastics. METHODOLOGY/PRINCIPAL FINDINGS A Bacillus sp. strain 2-6 for production of L-lactic acid was isolated at 55 degrees C from soil samples. Its thermophilic characteristic made it a good lactic acid producer because optically pure L-lactic acid could be produced by this strain under open condition without sterilization. In 5-liter batch fermentation of Bacillus sp. 2-6, 118.0 g/liter of L-lactic acid with an optical purity of 99.4% was obtained from 121.3 g/liter of glucose. The yield was 97.3% and the average productivity was 4.37 g/liter/h. The maximum L-lactic acid concentration of 182.0 g/liter was obtained from 30-liter fed-batch fermentation with an average productivity of 3.03 g/liter/h and product optical purity of 99.4%. CONCLUSIONS/SIGNIFICANCE With the newly isolated Bacillus sp. strain 2-6, high concentration of optically pure L-lactic acid could be produced efficiently in open fermentation without sterilization, which would lead to a new cost-effective method for polymer-grade L-lactic acid production from renewable resources.