Electrochemical Removal of Methylene Blue from Aqueous Solutions Using Taguchi Experimental Design

نویسنده

  • A. Asghari
چکیده

Taguchi optimization method (L32 orthogonal array) was applied as an experimental design to determine optimum conditions for methylene blue dye removal from aqueous solutions by electrocoagulation (EC). Various electrocoagualtion parameters such as initial pH, time of electrolysis, concentration of dye, electrodes gap, applied current, solution temperature, amount of supporting electrolyte, design and materials of electrodes were investigated. The results have been analyzed using signal-to-noise (S/N) ratio and analysis of variance (ANOVA). The amount of electrolyte parameter has been found to be the most significant parameter on the color removal. The study shows that the Taguchi’s method is suitable to optimize the experiments for dye removal.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Efficient Dye Removal from Aqueous Solutions Using Rhamnolipid Biosurfactants by Foam Flotation

Methylene blue was efficiently removed from aqueous solution by foam flotation using a rhamnolipid a biosurfactant as a dye collector. The effects of four parameters, namely, pH (1.5–11.5), frother concentration (5–65 ppm), aeration rate (2–6 L/min) and rhamnolipid to methylene blue weight ratio (0.5–6.5), on dye removal were studied and optimized using response surface methodology. Results...

متن کامل

Removal of methylene blue from aqueous solutions using modified clay

Introduction: Discharging of industrial colored wastewaters especially into aqueous environments can cause adverse effects on aquatic life due to their toxic natures. In this study, montmorillonite modified by hexadecyltrimethyl ammonium bromide (HDTMA-Mt) was used for the adsorption of methylene blue (MB). Materials and Methods: The influence of surfactant loading rate, contact time, pH, adso...

متن کامل

Efficiency of Integrated Photocatalytic UV/Persulfate Process in Removal of Methylene Blue and Acid Green 3 from Aqueous Solutions

Background & objectives: The release of dyestuff wastewaters produced in textile industry into receiving waters affects both human health and the environment. The aim of this study was to investigate the efficiency of a photocatalytic UV/persulfate process in removal of methylene blue and acid green 3 dyes from aqueous solutions. Methods: The current study was an experimental study, in which t...

متن کامل

Methylene blue removal from aqueous solutions by electrocoagulation in continuous flow reactor: Modeling and optimization of operating parameters

Introduction The application and increasingly produce of colorants, particularly, synthetic dyes, are one of the main environmental and health concerns especially in industrialized countries. If this type of dyes is discharged into the environment without any control, many problems will arise. Therefore, it is necessary to remove the dyes from aqueous solutions using appropriate methods. The p...

متن کامل

Removal of methylene blue dye by application of polyaniline nano composite from aqueous solutions

This paper deals with application of polyaniline coated on wood sawdust for removal ofmethylene blue (MB) dye from aqueous solutions. Polyaniline coated onto sawdust (termedas PAn/SD) was prepared via direct chemical polymerization onto sawdust which waspreviously soaked in the monomer (aniline) solution in acidic (HC1) media. Adsorptionexperiments were carried out using batch system. The effec...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012