Statistical modeling of compressible turbulent channel flow
نویسنده
چکیده
Several questions that are relevant to turbulence modeling are addressed on the basis of recently obtained direct numerical simulation results of turbulent supersonic channel flow. In particular, this concerns the turbulence frequency production mechanism, wall damping effects on turbulence model parameters, and the relevance of compressibility effects. Limited support is found for usually applied models for the turbulence frequency production and wall damping effects. In contrast to that it is shown that turbulence frequency production mechanisms and wall damping effects may be explained very well on the basis of a frequency scaling that characterizes mean flow changes. The influence of compressibility is found to be relevant.
منابع مشابه
Numerical Simulation of Turbulent Subsonic Compressible Flow through Rectangular Microchannel
In this study, turbulent compressible gas flow in a rectangular micro-channel is numerically investigated. The gas flow assumed to be in the subsonic regime up to Mach number about 0.7. Five low and high Reynolds number RANS turbulence models are used for modeling the turbulent flow. Two types of mesh are generated depending on the employed turbulence model. The computations are performed for R...
متن کاملEvaluation of two lattice Boltzmann methods for fluid flow simulation in a stirred tank
In the present study, commonly used weakly compressible lattice Boltzmann method and Guo incompressible lattice Boltzmann method have been used to simulate fluid flow in a stirred tank. For this purpose a 3D Parallel code has been developed in the framework of the lattice Boltzmann method. This program has been used for simulation of flow at different geometries such as 2D channel fluid flow an...
متن کاملOn the extension of LES methods from incompressible to compressible turbulent flows with application to turbulent channel flow
The objective of the present work is to validate the compressible Large-Eddy Simulation (LES) models implemented in the in house parallel unstructured CFD code TermoFluids. Our research team has implemented and tested several LES models over the past years for the incompressible regimen. In order to be able to solve complex turbulent compressible flows, the models are revisited and modified if ...
متن کاملComputational fluid dynamics study and GA modeling approach of the bend angle effect on thermal-hydraulic characteristics in zigzag channels
In the study, the thermal-hydraulic performance of the zigzag channels with circular cross-section was analyzed by Computational Fluid Dynamics (CFD). The standard K-Ꜫ turbulent scalable wall functions were used for modeling. The wall temperature was assumed constant 353 K and water was used as the working fluid. The zigzag serpentine channels with bend angles of 5 - 45° were studied for turbul...
متن کاملNumerical Investigation of Heat Transfer and Pressure Drop in a Corrugated Channel
The influence of variation in rib-height to channel-height ratio (e/H) on the heat transfer and pressure drop characteristics inside a channel with corrugated upper and lower plates was investigated numerically in the present study. The governing equations were solved by using finite volume approximations for a wide range of (0.06 < e/H < 0.26) and Reynolds numbers (5400 < Re < 23000), with a m...
متن کامل