MWCNT/V2O5 core/shell sponge for high areal capacity and power density Li-ion cathodes.
نویسندگان
چکیده
A multiwall carbon nanotube (MWCNT) sponge network, coated by ALD V(2)O(5), presents the key characteristics needed to serve as a high-performance cathode in Li-ion batteries, exploiting (1) the highly electron-conductive nature of MWCNT, (2) unprecedented uniformity of ALD thin film coatings, and (3) high surface area and porosity of the MWCNT sponge material for ion transport. The core/shell MWCNT/V(2)O(5) sponge delivers a stable high areal capacity of 816 μAh/cm(2) for 2 Li/V(2)O(5) (voltage range 4.0-2.1 V) at 1C rate (1.1 mA/cm(2)), 450 times that of a planar V(2)O(5) thin film cathode. At much higher current (50×), the areal capacity of 155 μAh/cm(2) provides a high power density of 21.7 mW/cm(2). The compressed sponge nanoarchitecture thus demonstrates exceptional robustness and energy-power characteristics for thin film cathode structures for electrochemical energy storage.
منابع مشابه
PEDOT Encapsulated FeOF Nanorod Cathodes for High Energy Lithium-Ion Batteries.
Conversion-reaction cathodes can potentially double the energy density of current Li-ion batteries. However, the poor cycling stability, low energy efficiency, and low power density of conversion-reaction cathodes limit their applications for Li-ion batteries. Herein, we report a revolutionary advance in a conversion-reaction cathode by developing a core-shell FeOF@PEDOT nanorods, in which part...
متن کاملHigh‐Performance Heterostructured Cathodes for Lithium‐Ion Batteries with a Ni‐Rich Layered Oxide Core and a Li‐Rich Layered Oxide Shell
The Ni-rich layered oxides with a Ni content of >0.5 are drawing much attention recently to increase the energy density of lithium-ion batteries. However, the Ni-rich layered oxides suffer from aggressive reaction of the cathode surface with the organic electrolyte at the higher operating voltages, resulting in consequent impedance rise and capacity fade. To overcome this difficulty, we present...
متن کاملFacile Synthesis of V2O5 Hollow Spheres as Advanced Cathodes for High-Performance Lithium-Ion Batteries
Three-dimensional V2O5 hollow structures have been prepared through a simple synthesis strategy combining solvothermal treatment and a subsequent thermal annealing. The V2O5 materials are composed of microspheres 2–3 μm in diameter and with a distinct hollow interior. The as-synthesized V2O5 hollow microspheres, when evaluated as a cathode material for lithium-ion batteries, can deliver a speci...
متن کاملSulfur Vapor-Infiltrated 3D Carbon Nanotube Foam for Binder-Free High Areal Capacity Lithium-Sulfur Battery Composite Cathodes.
Here, we demonstrate a strategy to produce high areal loading and areal capacity sulfur cathodes by using vapor-phase infiltration of low-density carbon nanotube (CNT) foams preformed by solution processing and freeze-drying. Vapor-phase capillary infiltration of sulfur into preformed and binder-free low-density CNT foams leads to a mass loading of ∼79 wt % arising from interior filling and coa...
متن کاملMesoporous carbon-carbon nanotube-sulfur composite microspheres for high-areal-capacity lithium-sulfur battery cathodes.
Lithium-sulfur (Li-S) batteries offer theoretical energy density much higher than that of lithium-ion batteries, but their development faces significant challenges. Mesoporous carbon-sulfur composite microspheres are successfully synthesized by combining emulsion polymerization and the evaporation-induced self-assembly (EISA) process. Such materials not only exhibit high sulfur-specific capacit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- ACS nano
دوره 6 9 شماره
صفحات -
تاریخ انتشار 2012