Jump conditions for unsteady small perturbations at fluid-solid interfaces in the presence of initial flow and prestress

نویسندگان

  • Fabien Treyssede
  • Mabrouk Ben Tahar
  • Fabien Treyssède
چکیده

The goal of this paper is to investigate jump conditions for unsteady small perturbations at impermeable interfaces, slip or bonded, plane or not, between fluids and structures in the presence of initial flow and prestress. Based on conservative equations obtained from a mixed Eulerian-Lagrangian description, interface conditions are first derived in an elegant and straightforward manner thanks to the concept of generalized functions in distribution theory. These conditions are validated with exact conditions derived from a direct linearization of the standard jump conditions. For a straightforward comparison between both approaches, all conditions are written in terms of a curvilinear coordinate system attached to the interface. The normal Lagrangian displacement continuity across the interface is proved to be a sufficient condition. The jump conditions for mass, momentum, energy and entropy are discussed, yielding conditions for the Lagrangian perturbations of displacement, stress, heat flux and temperature. Displacement and stress jump conditions are shown to coincide with literature results. The mixed Eulerian-Lagrangian description is likely to be advantageous over its fully Eulerian or Lagrangian counterparts. It yields an interesting unification between existing formulations for inviscid fluids (Galbrun’s equation) and solids (updated Lagrangian formulation), together with simpler jump conditions.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

NUMERICAL ANALYSIS OF MAVs FLAPPING WINGS IN UNSTEADY CONDITIONS

Today, Flapping Micro Aerial Vehicles (MAV) are used in many different applications. Reynolds Number for this kind of aerial vehicle is about 104 ~ 105 which shows dominancy of inertial effects in comparison of viscous effects in flow field except adjacent of the solid boundaries. Due to periodic flapping stroke, fluid flow is unsteady. In addition, these creatures have some complexities in kin...

متن کامل

Unsteady boundary layer flow of a Casson fluid past a wedge with wall slip velocity

In this paper an analysis is presented to understand the effect of non–Newtonian rheology, velocity slip at the boundary, thermal radiation, heat absorption/generation and first order chemical reaction on unsteady MHD mixed convective heat and mass transfer of Casson fluid past a wedge in the presence of a transverse magnetic field with variable electrical conductivity. The partial differential...

متن کامل

Slip flow in porous micro-tubes under local thermal non-equilibrium conditions

In the present work, forced convection heat transfer of slip flow in porous micro-tubes with local thermal non-equilibrium between the gas and the solid matrix is investigated numerically. For this purpose, the flow is considered hydrodynamically developed but thermally developing. The Darcy-Brinkman-Forchheimer model in conjunction with separate energy equations for the gas and the solid matri...

متن کامل

Unsteady free convection flow between two vertical plates with variable temperature and mass diffusion

The unsteady free convection flow between two long vertical parallel plates withvariable temperature and mass diffusion in the presence of the thermal radiation hasbeen presented. The governing dimensionless coupled linear partial differentialequations on the flow are solved by using the Laplace transform technique. TheExact solutions have been obtained for the fluid velocity, temperature and t...

متن کامل

Unsteady-state Computational Fluid Dynamics Modeling of Hydrogen Separation from H2/N2 Mixture

3D modeling of Pd/α-Al2O3 hollow fiber membrane by using computational fluid dynamic for hydrogen separation from H2/N2 mixture was considered in steady and unsteady states by using the concept of characteristic time. Characteristic time concept could help us to design and calculate surface to volume ratio and membrane thickness, and adjust the feed conditions. The contribution of resistance be...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017