An investigation into the crack initiation and propagation behaviour of bonded single lap joints using backface strain
نویسندگان
چکیده
An investigation into the crack initiation and propagation behaviour of bonded single lap joints using backface strain. V. Shenoy , I. A. Ashcroft , G. W. Critchlow , A. D. Crocombe , M. M. Abdel Wahab. a Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University, LE11, 3TU, UK b Institute of Polymer Technology and Materials Engineering (IPTME), Loughborough University, LE11, 3TU, UK c School of Engineering (H5), University of Surrey, Guildford, Surrey, GU2 5XH, UK Abstract
منابع مشابه
Damage Evolution in Composite Bonded Joints under Fatigue Loading
The fatigue behaviour of single lap bonded joints under fatigue loading was already investigated and a suitable life prediction model was presented and validated [1-2]. The model is based on the actual damage evolution under fatigue load: a crack initiation followed by its propagation up to a critical length [2, 3]. In the present paper the evolution of fatigue damage in single lap joints is ex...
متن کاملA review on stress distribution, strength and failure of bolted composite joints
In this study, analytical models considering different material and geometry for both single and double-lap bolted joints were reviewed for better understand how to select the proper model for a particular application. The survey indicades that the analytic models selected for the adhesively single or double bolted lap joints, as well as T, scarf, and stepped joints, with linear material pr...
متن کاملAnalytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings
In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...
متن کاملFracture behaviour of adhesively bonded single lap joint with 45° ply oriented four layered symmetric and antisymmetric adherends
In aerospace and many types of civil infrastructure applications, the use of adhesive-bonded composite joints have been constantly increasing. In this study, fracture behaviour of adhesively bonded single lap joint (SLJ) with pre-existing damage at the interface of free edge of the top adherend and adhesive along the width of the joint is studied by strain energy release rate (SERR) approach us...
متن کاملExperimental Investigation and Numerical Prediction of Fatigue Life in Force Fitted Fastener Holes
In this paper, the effect of interference fit on fatigue life of holed plate of mechanical joints was investigated experimentally. Fatigue tests were carried out on the holed specimens of Al-alloy 7075-T6 alloy. The interference fit process consists of force fitting a fastener into the hole with a negative clearance (diameter of the fastener is larger than of the hole) that produces beneficial ...
متن کامل