Carbon isotopomers measurement using mid-IR tunable laser sources.
نویسندگان
چکیده
Recent developments of two mid-infrared tunable laser spectrometers dedicated to carbon isotope ratio determination are presented. First, a field deployable quantum cascade laser-based sensor is described, along with line selection strategy for (13/12)CO(2) ratio measurements. Secondly, an instrument architecture based on difference frequency generation is presented. The analyses of fundamental limitations, specifically temperature and pressure stability, and water vapor collision broadening, are detailed.
منابع مشابه
Monolithically, widely tunable quantum cascade lasers based on a heterogeneous active region design
Quantum cascade lasers (QCLs) have become important laser sources for accessing the mid-infrared (mid-IR) spectral range, achieving watt-level continuous wave operation in a compact package at room temperature. However, up to now, wavelength tuning, which is desirable for most applications, has relied on external cavity feedback or exhibited a limited monolithic tuning range. Here we demonstrat...
متن کاملDiode laser absorption sensors for gas-dynamic and combustion flows.
Recent advances in room-temperature, near-IR and visible diode laser sources for tele-communication, high-speed computer networks, and optical data storage applications are enabling a new generation of gas-dynamic and combustion-flow sensors based on laser absorption spectroscopy. In addition to conventional species concentration and density measurements, spectroscopic techniques for temperatu...
متن کاملDevelopment of a tunable mid-IR difference frequency laser source for highly sensitive airborne trace gas detection.
The development of a compact tunable mid-IR laser system at 3.5 micrometers for quantitative airborne spectroscopic trace gas absorption measurements is reported. The mid-IR laser system is based on difference frequency generation (DFG) in periodically poled LiNbO3 and utilizes optical fiber amplified near-IR diode and fiber lasers as pump sources operating at 1083 nm and 1562 nm, respectively....
متن کاملA spectroscopic study for detection of carbon- monoxide using mid-infrared techniques for single- pass measurement
Tomographic imaging of minor species in combustion exhaust is an important requirement for combustion engineering. Only one group has tried carbon monoxide imaging in laminar flames in the mid-infrared region. A number of attempts have been made by different groups for single-channel multi-pass or long path-length measurement of CO. Singlepass measurement is being assessed in our work for tomog...
متن کاملYb fiber laser pumped mid-IR source based on difference frequency generation and its application to ammonia detection.
A Yb fiber laser pumped cw narrow-linewidth tunable mid-IR source based on a difference frequency generation (DFG) in a periodically poled LiNbO3 (PPLN) crystal for trace gas detection was demonstrated. A high power Yb fiber laser and a distributed feedback (DFB) laser diode were used as DFG pump sources. This source generated mid-IR at 3 microns with a powers of ~2.5 microW and a spectral line...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Isotopes in environmental and health studies
دوره 41 4 شماره
صفحات -
تاریخ انتشار 2005