Plasticity Analysis of the Strain in the Tangential Direction of Solid Wood Subjected to Compression Load in the Longitudinal Direction
نویسنده
چکیده
Uniaxial compression tests in the grain (longitudinal) direction of solid wood were conducted using specimens of Sitka spruce and Japanese birch. The nonlinear stress-strain behavior was analyzed using plasticity theory, which is typically applied to ductile materials such as metals. The relationship between the longitudinal and tangential directions obtained from the experimental results showed nonlinearity, as predicted based on plasticity theory. Nevertheless, it was more pronounced in the experimental results than in the plasticity analysis.
منابع مشابه
Determination of Load and Strain-Stress Distributions in Hot Closed Die Forging Using the Plasticine Modeling Technique
An axisymmetric hot closed die-forging process has been studied by physical modeling technique using the plasticine. To observe the material flow pattern, layers of plasticine with different colors were used. The normal direction to the layers was considered a principal direction. The strain distribution was obtained by measuring the thickness of the plasticine layers. Based on the strain distr...
متن کاملCracks Analysis in Zavin Concrete Dam Using Fracture Mechanics Approach
Most of the existing concrete dams are subjected to cracking. These cracks are caused by various factors such as construction practices, curing, loads and volume change of mass concrete which reduce the efficiency, failure or instability of concrete dams. Using fracture mechanics as a new method to estimate stability and durability of concrete dams is recommended in scientific publications in w...
متن کاملThermoelastic Analysis of a Functionally Graded Simple Blade Using First-Order Shear Deformation Theory
In this article, the thermo-elastic behavior of a functionally graded simple blade subjected to the mechanical and thermal loadings is presented, applying a semi-analytical method and a variable thickness cantilever beam model. A specific temperature gradient is employed between the root and the edges of the beam. It is assumed that the mechanical and thermal properties are longitudinal directi...
متن کاملCreep Stress Redistribution Analysis of Thick-Walled FGM Spheres
Time-dependent creep stress redistribution analysis of thick-walled FGM spheres subjected to an internal pressure and a uniform temperature field is investigated. The material creep and mechanical properties through the radial graded direction are assumed to obey the simple power-law variation throughout the thickness. Total strains are assumed to be the sum of elastic, thermal and creep strain...
متن کاملAnalysis on Centrifugal Load Effect in FG Hollow Sphere Subjected to Magnetic Field
This paper presents the effect of centrifugal load in functionally graded (FG) hollow sphere subjected to uniform magnetic field. Analytical solution for stresses and perturbation of the magnetic field vector are determined using the direct method and the power series method. The material stiffness, the magnetic permeability and the density vary continuously across the thickness direction accor...
متن کامل