Laser-fabricated castor oil-capped silver nanoparticles
نویسندگان
چکیده
Silver nanoparticles were fabricated by ablation of a pure silver plate immersed in castor oil. A Nd:YAG-pulsed Q-switch laser with 1064-nm wavelength and 10-Hz frequency was used to ablate the plate for 10 minutes. The sample was characterized by ultraviolet-visible, atomic absorption, Fourier transform-infrared spectroscopies, and transmission electron microscopy. The results of the fabricated sample showed that the nanoparticles in castor oil were about 5-nm in diameter, well dispersed, and showed stability for a long period of time.
منابع مشابه
Nanophotothermolysis of Poly-(vinyl) Alcohol Capped Silver Particles
Laser-induced thermal fusion and fragmentation of poly-(vinyl) alcohol (PVA)-capped silver nanoparticles in aqueous medium have been reported. PVA-capped silver nanoparticles with an average size of 15 nm were prepared by chemical reduction technique. The laser-induced photofragmentation of these particles has been monitored by UV-visible spectroscopy and transmission electron microscopy. The m...
متن کاملFabrication of Silver Nanoparticles Dispersed in Palm Oil Using Laser Ablation
In this study we used a laser ablation technique for preparation of silver nanoparticles. The fabrication process was carried out by ablation of a silver plate immersed in palm oil. A pulsed Nd:YAG laser at a wavelength of 1064 nm was used for ablation of the plate at different times. The palm coconut oil allowed formation of nanoparticles with very small and uniform particle size, which are di...
متن کاملFabrication of Silver Nanoparticles Dispersed in Palm Oil
In this study we used a laser ablation technique for preparation of silver nanoparticles. The fabrication process was carried out by ablation of a silver plate immersed in palm oil. A pulsed Nd:YAG laser at a wavelength of 1064 nm was used for ablation of the plate at different times. The palm oil allowed formation of nanoparticles with very small and uniform particle size, which are dispersed ...
متن کاملChitosan Capped Silver Nanoparticles as Colorimetric Sensor for the Determination of Iron(III)
A selective, simple and low-cost method for the colorimetric determination of Fe3+ ions based on chitosan capped silver nanoparticles (Chit-AgNPs) was presented. Chitosan is a cationic polyelectrolyte and possesses amino and hydroxy groups which make it widely used as a capping agent for Ag NPs. The synthesized chitosan capped silver nanoparticles with excellent colloidal stability were charact...
متن کاملFabrication of gold and silver nanoparticles with pulsed laser ablation under pressurized CO2
Pulsed laser ablation (PLA) has become a promising method for the synthesis of nanoclusters for photonics, electronics and medicine. In this work PLA in pressurized CO2 has been applied for fabrication of gold and silver nanoparticles. Laser ablation was performed with an excitation wavelength of 532 nm under various pressures (0.1–20MPa), temperatures (40–80 C) of CO2 medium and ablation times...
متن کامل