Design of a Novel Dual-loop Gate Antenna for Radio Frequency Identification (rfid) Systems at Low Frequency Band
نویسندگان
چکیده
In this paper, a dual-loop gate antenna is designed to generate the magnetic field distribution in various directions. It is applied to Radio Frequency Identification (RFID) systems for animal identification operating at the low frequency (LF) band of 125 kHz and 134.2 kHz. The percentage of volume of magnetic field intensity is introduced and used as a figure of merit in the design. The optimum antenna parameters are also designed by the genetic algorithm (GA) in conjunction with the Numerical Electromagnetic Code (NEC). The prototype antenna was fabricated and tested to confirm the antenna performance in the LF-RFID system for animal identification. It is found that the dual-loop gate antenna can be efficiently used in the LF-RFID system.
منابع مشابه
Design and Implementation of Field Programmable Gate Array Based Baseband Processor for Passive Radio Frequency Identification Tag (TECHNICAL NOTE)
In this paper, an Ultra High Frequency (UHF) base band processor for a passive tag is presented. It proposes a Radio Frequency Identification (RFID) tag digital base band architecture which is compatible with the EPC C C2/ISO18000-6B protocol. Several design approaches such as clock gating technique, clock strobe design and clock management are used. In order to reduce the area Decimal Matrix C...
متن کاملDual-band RFID tag antenna based on the Hilbert-curve fractal for HF and UHF applications
A novel single-radiator card-type tag is proposed which is constructed using a series Hilbert-curve loop and matched stub for high frequency (HF)/ultra high frequency (UHF) dual-band radio frequency identification (RFID) positioning applications. This is achieved by merging the series Hilbert-curve for implementing the HF coil antenna, and square loop structure for implementing the UHF antenna ...
متن کاملSystematic Design of High-Performance Smart Card with HF/UHF Dual-Band RFID Tag
Recently, there have been widely conducted researches on dual-band radio frequency identification (RFID) tag based on 13.56 MHz (HF) and 900 MHz (UHF). Most dual-band RFID tag has been implemented so that each antenna is separated in a different inlay sheet respectively, which makes the resulting smart card impractically thick, and the typical drawback of dual-band RFID tags incorporated in one...
متن کاملA compact stacked Quasi-fractal microstrip antenna for RFID applications
In this paper, we propose a new compact quasi-fractal shaped microstrip antenna that consists of a hexagonal patch as the main radiator and a complementary stacked patch as the parasitic element. The overall surface of the proposed quasi-fractal patch is about 55% lower than the conventional hexagonal patch. Using of stacked technique, the gain reduction of compression technique is almost compe...
متن کاملCompact Dual Band Tag Antenna Design for Radio Frequency Identification (rfid) Application
The increasing need for automatic identification and object tracking in supply chains has led to the development of radio frequency identification (RFID) systems. High frequency (HF) and ultra-high frequency (UHF) bands are frequently used because of their advantages over other bands. Although many HF and UHF band tags exist, some are unsuitable to handle the hostile environment of a supply cha...
متن کامل