Pattern formation in plastic liquid films on elastomers by ratcheting.
نویسندگان
چکیده
Plastic liquids, also known as Bingham liquids, retain their shape when loads are small, but flow when loads exceed a threshold. We discovered that plastic liquid films coated on elastomers develop wavy patterns under cyclic loads. As the number of cycles increases, the wavelength of the patterns remains unchanged, but the amplitude of the patterns increases and then saturates. Because the patterns develop progressively under cyclic loads, we call this phenomenon as "patterning by ratcheting". We observe the phenomenon in plastic liquids of several kinds, and studied the effects of thickness, the cyclic frequency of the stretch, and the range of the stretch. Finite element simulations show that the ratcheting phenomenon can occur in materials described by a commonly used model of elastic-plastic deformation.
منابع مشابه
Numerical and Experimental Study on Ratcheting Behavior of Plates with Circular Cutouts under Cyclic Axial Loading
In this paper, accumulation of plastic deformation of AISI 1045 steel plates with circular cutouts under cyclic axial loading is studied. Loading was applied under force-control conditions. Experimental tests were performed using a Zwick/Roell servo hydraulic machine. Under force-control loading with nonzero mean force, plastic strain was accumulated in continuous cycles called ratcheting. Nume...
متن کاملNumerical and Experimental Study on Ratcheting Behavior of Steel Cylindrical Shells with/without Cutout Under Cyclic Combined and Axial Loading
Ratcheting behavior of steel 304L cylindrical shell under cyclic combined and axial loading are investigated in this paper, numerically. Cylindrical shells were fixed oblique at angle of 20° and normal with respect to the longitudinal direction of the shell and subjected to force-controlled cycling with non-zero mean force, which causes the accumulation of plastic deformation or ratcheting beha...
متن کاملSurface Wrinkling in Liquid Crystal Elastomers
Structured surfaces give rise to novel and potentially useful properties such as controllable wettability and structural colour. Here, we demonstrate structured surfaces via reversible surface wrinkling in liquid crystal elastomers (LCEs). A thin polymer film deposited on top of a shape-responsive LCE exhibits a reversible, periodic surface wrinkling pattern in response to temperature changes. ...
متن کاملModeling Defects, Shape Evolution, and Programmed Auto-Origami in Liquid Crystal Elastomers
Liquid crystal elastomers represent a novel class of programmable shape-transforming materials whose shape-change trajectory is encoded in the material’s nematic director field. Using three-dimensional non-linear finite element elastodynamics simulation, we model a variety of different actuation geometries and device designs: thin films containing topological defects, patterns that induce forma...
متن کاملInfluence of the porosity on the photoresponse of a liquid crystal elastomer
Azobenzene containing liquid crystal elastomers (LCEs) are among of the most prominent photoresponsive polymers due to their fast and reversible response to different light stimuli. To bring new functions into the present framework, novel modifications in bulk material morphology are required. Therefore, we produced azobenzene LCE free-standing films with different porosities. While the porosit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Soft matter
دوره 12 16 شماره
صفحات -
تاریخ انتشار 2016