Locating Delamination in Composite Laminated Beams Using the Zero-Order Mode of Lamb Waves
نویسندگان
چکیده
منابع مشابه
Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique
In the present research, the effects of delamination size and location on vibration characteristics of laminated composite beams are investigated both analytically and numerically. In the analytical method, the delaminated beam is modeled as four interconnected Euler–Bernoulli beams and the constrained and free mode models are both simulated. The differential stretching and the bending-extensio...
متن کاملExperimental and numerical study of delamination detection in a WGF/epoxy composite plate using ultrasonic guided waves and signal processing tools
Reliable damage detection is one of the most critical tasks in composite plate structures. Ultrasonic guided waves are acknowledged as an effective way of structural health mo...
متن کاملBuckling Analysis of Rectangular Laminated Composite Plates With An Edge Delamination Under Compressive Load
The buckling analysis of rectangular laminated composite plates with an edge delamination under in-plane compressive loading is performed using the finite element method. Such a plate may be considered as a simplified model of stiffener plates of a stiffened panel. The buckling load and buckling mode are obtained by solving an eigenproblem. In an unconstrained analysis, physically inadmissible ...
متن کاملAnalysis of post-buckling and delamination in laminated composite St. Venant–Kirchhoff beams using CZM and layer-wise TSNDT
A layer-wise third order shear and normal deformable plate/shell theory (TSNDT) incorporating a cohesive zone model (CZM) is used to study the initiation and growth of delamination in straight and curved laminated beams. Upon satisfaction of the delamination criteria at a point on the interface between two layers, displacements there of two abutting points on the interface between the two layer...
متن کاملNumerical Determination of Delamination Onset in Laminated Symmetric DCB Specimen
In this study, a novel numerical method is proposed for determination of mode-I interlaminar fracture toughness, GIc, in multi-directional (MD) double cantilever beam (DCB) specimens using fracture properties of unidirectional DCB specimens. Two factors, β and Dc are defined to minimize the undesirable effects on strain energy release rate. β describes the difference between maximum and average...
متن کامل