Integration of inverted InGaAs MSM array on Si substrate through low temperature wafer bonding
نویسندگان
چکیده
An array of inverted InGaAs metal–semiconductor–metal (MSM) photodetectors has been integrated into a silicon substrate using a low temperature In–Au wafer bonding technique. The total thickness of the bonding metal layers is less than 1 mm. It is shown that the photocurrent of the back illuminated InGaAs MSM photodetectors after bonding increases by 70% compared to the front illuminated MSM measured prior to bonding while the dark current reduces slightly after bonding.
منابع مشابه
Fabrication of vertical thin-GaN light-emitting diode by low-temperature Cu/Sn/Ag wafer bonding
Vertical thin-GaN LED was successfully fabricated on the GaN LED epi-layers grown on the patternedsapphire substrate with the pyramidal pattern by low-temperature Cu/Sn/Ag wafer bonding at 150 C. An inverted pyramidal pattern formed on the n-GaN surface after the GaN epi-layer was transferred onto Si wafer, which resulted from the pyramidal pattern on the patterned-sapphire substrate. The inver...
متن کاملHigh performance InAs quantum dot lasers on silicon substrates by low temperature Pd-GaAs wafer bonding
Articles you may be interested in MBE growth of P-doped 1.3 μm InAs quantum dot lasers on silicon Low-threshold high-quantum-efficiency laterally gain-coupled InGaAs/AlGaAs distributed feedback lasers Appl. 1.3 μm InGaAsP/InP lasers on GaAs substrate fabricated by the surface activated wafer bonding method at room temperature Appl.
متن کاملSolid-state reaction-mediated low-temperature bonding of GaAs and BnP wafers to Si substrates
We report a low-temperature wafer bonding method for the realization of integration of GaAsand InP-based optoelectronic devices with Si microelectronic devices. This method uses a Au-Ge eutectic alloy as the bonding material sandwiched between GaAs and Si wafers, and between InP and Si wafers. The bonding process was carried out at 280-300 “C by taking advantage of the low-temperature solid-sta...
متن کاملInGaAs/InP quantum well infrared photodetector integrated on Si substrate by Mo/Au metal-assisted wafer bonding
Integration of an InGaAs/InP quantum well infrared photodetector (QWIP) onto a Si substrate was successfully demonstrated via a metal-assisted wafer bonding (MWB) using a Mo/Au metal scheme. The Mo/Au/Mo layer, situated between the QWIP structure and the Si, has shown a well-ordered lamination. It provides a smooth surface with a roughness of about 0.8 nm, as measured by a scanning electron mic...
متن کاملLow-Cost High-Efficiency Solar Cells
III-V compound multijunction solar cells enable ultrahigh efficiency performance in designs where subcells with high material quality and high internal quantum efficiency can be employed. However the optimal multijunction cell bandgap sequence cannot be achieved using lattice-matched compound semiconductor materials. Most current compound semiconductor solar cell design approaches are focused o...
متن کامل